iDRY Vacuum Kilns

Sponsors:

Grease Gun

Started by Mooseherder, June 15, 2006, 05:51:40 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2 All
User actions

Don_Papenburg

#25
June 19, 2006, 10:45:18 PM
Pigman , if you don't want to get your fingers greasy do like I do .  I have my wife fill the grease guns ;D ;D ;D ;D ;D ;D
Frick saw mill  '58   820 John Deere power. Diamond T trucks

sawguy21

#26
June 19, 2006, 11:29:39 PM
I view most grease guns as an evil necessity. Great when they work but they usually make a mess and give me grief. >:(
old age and treachery will always overcome youth and enthusiasm

scsmith42

#27
June 19, 2006, 11:34:33 PM
From the TSC web site, it looks like they carry Alemite brand grease guns and accessories.  As I recall, Alemite is part of Stewart Warner, a top notch company.

The web site did not list any bulk grease pumps, but I'll see what I can find.

Thanks for the advice.

Scott
Peterson 10" WPF with 65' of track
Smith - Gallagher dedicated slabber
Tom's 3638D Baker band mill
and a mix of log handling heavy equipment.

Burlkraft

#28
June 19, 2006, 11:43:02 PM
We sell both....the warranty rate on Alemite/S.W. is pretty high....

I kinda like Lincoln better......but that's just me ;) ;)
Why not just 1 pain free day?

joelmar10

#29
June 20, 2006, 12:02:17 AM
Coon,

I was gonna recommend you tie your grease gun around your neck just to keep track of it.  But then I realized you'd probably end up decapitated or worse. smiley_roller
I used to think I could fix DanG near anything...now I know I can...or I think I can...or maybe I can?

sprucebunny

#30
June 20, 2006, 12:32:50 PM
Coon, it must be the moon.

This is only a "near-grease-gun story" like "near-beer" ;D
The grease guns live on a peg on the side of a tall narrow shelf thing that is screwed to the wall. On the top shelf, six and a half feet up, lived an unused espresso maker. It seemed happy there the last 5 or so years, but yesterday, just as I opened the door, it leaped to it's death  :o

Going to check the mental health of the rest of my appliances and make sure they are happy ..... just as soon as the power comes back on ......  :D
MS193, MS192 and an 026  Weeding and Thinning. Gilbert Champion sawmill

Coon

#31
June 20, 2006, 06:10:41 PM
I don't need to be decapitated yet but maybe someday.  Next time I finish with it I'll just throw it as far as I can and hope for the best.  Then the next problem will be to find it when I need it. :D :D :D

Brad.
Norwood Lumbermate 2000 w/Kohler,
Husqvarna, Stihl and, Jonsereds Saws

scsmith42

#32
June 20, 2006, 10:16:43 PM
Bulkraft - thanks for the feedback.  I've really enjoyed my Lincoln power luber - based on your comment I'll check out their bulk refilling systems.  Regards, Scott
Peterson 10" WPF with 65' of track
Smith - Gallagher dedicated slabber
Tom's 3638D Baker band mill
and a mix of log handling heavy equipment.

Mooseherder

#33
June 21, 2006, 01:18:50 PM
Bought my third grease gun today. Hope it works this time or the problem may not be the gun. :D
We are leaving for our trip in a couple hours and will miss the forum for a couple weeks.
Can't wait to tell you about our new to us purchase when we get back!
We'll take pictures as we are dismantling and reassembling.
Print
Go Up Pages 1 2 All
User actions

Thank You Sponsors!