iDRY Vacuum Kilns

Sponsors:

Dozer winch for skidsteer?

Started by Pclem, February 09, 2018, 08:16:15 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Pclem

I used to have a home built tractor winch that came off a dozer. Plugged into aux. Gpm's on tractor were slow. Worked ok. I assume I would get more performance with a bobcat with higher gpm? I'd like build my own and want to know what to look for. Not gonna be for pulling a big hitch, just hung up trees, and hard to get stuff till I can grab hold with the bobcat. I see they make new hydraulic winches for autos, assume they run off power steering? Would this be a viable route too?
Dyna SC16. powersplit. supersplitter. firewood kilns.bobcat T190. ford 4000 with forwarding trailer. a bunch of saws, and a question on my sanity for walking away from a steady paycheck

mike_belben

I use a $300 chinese 12vdc electric winch on a reciever hitch plate for use on aything i weld a reciever to.  Its got a short lead with an anderson connector for the things ive hardwired, and i made a long jumper for everything else.  All my trailers and a few of my attachments have receivers and everything obviously has one or more 12v batteries.  I use arc welding cables from the scrap yard to make up power wires.  The ring terminals are just pieces of soft copper tubing, hammer smashed and soldered on with a hole drilled in the tab.   Pretty much all my batteries are group 31 semi tractor batts with stud tops now.  No more lead clamp headaches. 
Praise The Lord

chevytaHOE5674

I had a mile marker hydraulic winch like you mentioned that was meant to run off a power steering pump and powered it off my dozers hydraulics and it worked good for pulling wood and what not. My only complaint was it was slow, would pull a house but takes all day to do it.

Riwaka

A light/ medium hydraulic  wrecker truck winch. Probably find lower cost one if a wrecker has been in a wreck itself.
https://www.warn.com/industrial/winches/hydraulic_winches_all.jsp

(warn, mile marker - how many other brands ? most have good and not so good models)
20 feet of remote cable on some if you need a bit of stand back space.

Mounting position &machine positioning fairly important to give a good pull.

Should also see if there are any skid steer winch units around (clutch units etc)- used to compare cost wise/ time saving vs building your own.
https://youtu.be/KEIhvlE89ZE

Wrecker winch with plastic rope - fairleads and smart use of block
https://youtu.be/u_I7rcZvqiQ

Asian friends appear to still have a bit of development work left to do on their model
https://youtu.be/5hiwzmolly4


eterra slow/ fast - clutch for pullout.

https://youtu.be/9P33c8VSGWw



Thank You Sponsors!