iDRY Vacuum Kilns

Sponsors:

Where to buy Peterson blades

Started by yarnammurt, January 29, 2014, 06:27:30 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

yarnammurt

Where do I buy blades for my Peterson mill?  Is there a place in the states to buy one?
ATS 10" Peterson, 09 New Holland 4x4 TL90 with loader, 125hp White,2 2009 Kawasaki 610 mules,

double cut1

b.h. payne in atlanta ga they can build almost any thing they mad a 27" blade for my dl double cut  they have been in business for 100+ years great service .

terrifictimbersllc

I bought a genuine Peterson blade last year from Peterson which shipped from New York.   Peterson keeps a stock of blades and many other parts at their distributor Hud-son in Barneveld NY for shipping in the US.   You make the order and payment to Peterson directly then it ships from NY.  Contact Joyce Ranapiri at Peterson:  JRanapiri@petersonsawmills.com    You can get to the US stock price list through your Peterson login or also directly from Joyce.   I've dealt with BH Payne and also Sharp Tool Co. in Hudson, MA,  concerning retipping my blades (Saw Doctor).
DJ Hoover, Terrific Timbers LLC,  Mystic CT Woodmizer Million Board Foot Club member. 2019 LT70 Super Wide 55 Yanmar,  LogRite fetching arch, WM BMS250 sharpener/BMT250 setter.  2001 F350 7.3L PSD 6 spd manual ZF 4x4 Crew Cab Long Bed

yarnammurt

Quote from: double cut1 on January 29, 2014, 06:56:43 PM
b.h. payne in atlanta ga they can build almost any thing they mad a 27" blade for my dl double cut  they have been in business for 100+ years great service .

Thank you, they are building me some. $525 from peterson , $155 from B,H payne.
ATS 10" Peterson, 09 New Holland 4x4 TL90 with loader, 125hp White,2 2009 Kawasaki 610 mules,

tjhammer

you can't beat bh payne for the money,I have a friend in macon with a peterson,payne saws is all he uses
tj
hammer

two-legged-sawmill

Hello Yarnammurt and other Peterson blade users. The blade that was shipped from Hud-son Forestry to Ct. was $400. Peterson Price. The $525. was not from Hud-son, shipped or quoted, Just for the record. Every thing in my
opinion is too expensive with out inflating prices.  Dan sr
"There are no secrets to success. It is the results of preperation, hard work, and learning from failures"

terrifictimbersllc

Quote from: two-legged-sawmill on February 07, 2014, 04:32:09 PM
Hello Yarnammurt and other Peterson blade users. The blade that was shipped from Hud-son Forestry to Ct. was $400. Peterson Price. The $525. was not from Hud-son, shipped or quoted, Just for the record. Every thing in my
opinion is too expensive with out inflating prices.  Dan sr
He's right of course I can confirm ($400+ship), it was me.   Perhaps just a minor detail, or maybe not, but if you get it from BHP it won't be a Peterson blade.
DJ Hoover, Terrific Timbers LLC,  Mystic CT Woodmizer Million Board Foot Club member. 2019 LT70 Super Wide 55 Yanmar,  LogRite fetching arch, WM BMS250 sharpener/BMT250 setter.  2001 F350 7.3L PSD 6 spd manual ZF 4x4 Crew Cab Long Bed

yarnammurt

Quote from: terrifictimbersllc on February 07, 2014, 04:45:14 PM
Quote from: two-legged-sawmill on February 07, 2014, 04:32:09 PM
Hello Yarnammurt and other Peterson blade users. The blade that was shipped from Hud-son Forestry to Ct. was $400. Peterson Price. The $525. was not from Hud-son, shipped or quoted, Just for the record. Every thing in my
opinion is too expensive with out inflating prices.  Dan sr
He's right of course I can confirm ($400+ship), it was me.   Perhaps just a minor detail, or maybe not, but if you get it from BHP it won't be a Peterson blade.
Yea, I know it wont be a Peterson blade. They cut them. I talked to Bobbby Richardson and he knew just what I was needing. He said they have gotten so many calls about the Peterson blade they started making them. Very good blades you put them side by side you would not know what one was the Peterson blade. And the $525 was from Peterson that Joyce sent me $525+ shipping. But even $400 or $155 for from what I can tell is just as good of a product with a warranty I will take the $155 every time.
ATS 10" Peterson, 09 New Holland 4x4 TL90 with loader, 125hp White,2 2009 Kawasaki 610 mules,

two-legged-sawmill

Good Morning, I agree 100% with all that is said from everyone. I wish that I would have saved more along the way.  For an old saying that is true " A penny saved is a penny earned." Have a good Day!  Dan sr
PS This is what makes competition work, an edge to stay successful.
"There are no secrets to success. It is the results of preperation, hard work, and learning from failures"

Mt406

I ordered a blade from Payne yesterday  saved 320$ it was for a D&L.
It was a 25in insert blade.
I have found them very helpful there.

double cut1

the people at b.h. payne are great to work with . I have seen adds in old papers from the 1900 with B.H. Payne .

Thank You Sponsors!