The Forestry Forum is sponsored in part by:

iDRY Vacuum Kilns


Forestry Forum
Sponsored by:


TimberKing Sawmills



Toll Free 1-800-582-0470

LogRite Tools



Norwood Industries Inc.




Your source for Portable Sawmills, Edgers, Resaws, Sharpeners, Setters, Bandsaw Blades and Sawmill Parts

EZ Boardwalk Sawmills. More Saw For Less Money!

STIHLDealers.com sponsored by Northeast STIHL


Woodland Sawmills

Peterson Swingmills

 KASCO SharpTech WoodMaxx Blades

Turbosawmill

Sawmill Exchange

Michigan Firewood, your BRUTE FORCE Authorized Dealer

Baker Products

ECHO-Bearcat

iDRY Wood Lumber Vacuum Drying for everyon

Nyle Kiln Dry Systems

Chainsawr, The Worlds Largest Inventory of Chainsaw Parts

Smith Sawmill Service



Author Topic: splitter opinoins  (Read 1611 times)

0 Members and 1 Guest are viewing this topic.

Offline trapper

  • Senior Member x2
  • *****
  • Posts: 1811
  • Age: 77
  • Location: wis
  • Gender: Male
  • I'm new!
    • Share Post
splitter opinoins
« on: February 06, 2021, 05:19:30 PM »
I have decided I would like a splitter with log lift and 4 way wedge.  So far I like the wolf ridge splitter and it is made a couple hundred miles from me which is driving distance. I sell a couple cords of wood a year and would like a new toy to make it easier. I now have a 37 ton horizontal - vertical  splitter. The wolf ridge has a pan beyond the wedge that i think I could put the bucket of the tractor  under to catch the split wood. Opinions on this and others like it are welcome.  Not handy at frabicating anything myself.
stihl ms241cm ms261cm  echo 310 400 suzuki  log arch made by stepson several logrite tools woodmizer LT30

Offline Chipmeister

  • member
  • *
  • Posts: 5
  • I'm new!
    • Share Post
Re: splitter opinoins
« Reply #1 on: February 06, 2021, 08:48:39 PM »
Have you taken a look at the Ruggedmade 37 ton? Comes with a log lift and 4 way wedge and a nice log table. I'm going to pull the trigger on one very soon. Much lower price point. Only down side is "some assembly" is required. 

Offline trapper

  • Senior Member x2
  • *****
  • Posts: 1811
  • Age: 77
  • Location: wis
  • Gender: Male
  • I'm new!
    • Share Post
Re: splitter opinoins
« Reply #2 on: February 06, 2021, 09:58:20 PM »
china engine and not as refinded in my opinion.  things like hydraulic 4 way wedge. and larger hydraulic tank.  but thanks for sujestion If I could look at one in person it might change my mind.
stihl ms241cm ms261cm  echo 310 400 suzuki  log arch made by stepson several logrite tools woodmizer LT30

Offline Chipmeister

  • member
  • *
  • Posts: 5
  • I'm new!
    • Share Post
Re: splitter opinoins
« Reply #3 on: February 07, 2021, 10:03:23 AM »
I agree with both your points, and if that is important to you and you have that money to spend on it, go for it. 

I would like to see one in person too, but can't locate one close to me. I asked them for references and they said they couldn't give out that information. (good that they value privacy). I watched a lot of videos on line and really haven't heard negatives other than the assembly concerns (not a big deal to me). There are a couple guys on line who modified it for a hydraulic wedge. 

Offline barbender

  • Senior Member x2
  • *****
  • Posts: 8137
  • Age: 45
  • Location: Deer River MN
  • Gender: Male
    • Share Post
Re: splitter opinoins
« Reply #4 on: February 07, 2021, 10:58:17 AM »
Wolfe Ridge, and Brute Force makes some nice splitters in Wisconsin as well. Eastonmade makes fine machines as well. In my opinion, if you want a tool spend the extra money and skip the Chinese crap. 
Too many irons in the fire

Offline hedgerow

  • Senior Member
  • ****
  • Posts: 932
    • Share Post
Re: splitter opinoins
« Reply #5 on: February 07, 2021, 11:42:37 AM »
The only higher end factory made wood splitter I have been around was a TimberWolf TW5 or TW 6. A buddy of mine and myself went over to Iowa a few years ago to help work up some wood for a friend that was laid up. We ran his timberwolf for three days probably ten hours a day and by the end of three days I couldn't stand up straight. My back was done. The splitter was great log lift, four way but the working height was too low for us. Both of us are around six foot. I wish I would have hauled my homemade one with the log lift over there. If that said I would go ran a Wolf Ridge and make sure the working is were you want it and if it isn't have it built so it is. Enjoy the new tool {TOY}.  

Offline Bruno of NH

  • Senior Member x2
  • *****
  • Posts: 4825
  • Age: 55
  • Location: Springfield NH
  • Gender: Male
    • Share Post
Re: splitter opinoins
« Reply #6 on: February 07, 2021, 12:53:40 PM »
Stay away from Rugged made
Friend bought one told him not to.
Look at Woodmizer and Woody's equipment as well.
Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

Offline 47sawdust

  • Senior Member x2
  • *****
  • Posts: 1803
  • Age: 74
  • Location: worcester,vt.
  • Gender: Male
    • Share Post
Re: splitter opinoins
« Reply #7 on: February 07, 2021, 01:34:17 PM »
For comfortable working height with a log lift I'm real happy with my Timberdevil. Foot actuated splitting ram very well built. Timberdevil has been at it since the late 70's.
 In a hurry, forget it ,they are backed up 3 months.
 
 This is what I bought in 2017




 I converted it to self propelled this fall.Splitting wood is almost fun now.This is my 3rd and last splitter.

 

 
Mick
1997 WM Lt30 1999 WM twin blade edger Kubota L3750 Tajfun winchGood Health Work is my hobby.

Offline Chipmeister

  • member
  • *
  • Posts: 5
  • I'm new!
    • Share Post
Re: splitter opinoins
« Reply #8 on: February 07, 2021, 07:33:33 PM »
Stay away from Rugged made
Friend bought one told him not to.
Look at Woodmizer and Woody's equipment as well.
Can you add some meat to those bones? Did he have issues or was this your opinion that you gave to him (and now me), and if so, what is the basis?

Offline Bruno of NH

  • Senior Member x2
  • *****
  • Posts: 4825
  • Age: 55
  • Location: Springfield NH
  • Gender: Male
    • Share Post
Re: splitter opinoins
« Reply #9 on: February 07, 2021, 08:04:02 PM »
A bunch of the parts didn't fit right. He had a tough time getting the valve bank put together and when he did it had bad parts. Had to wait for replacements and do it all again.
Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

Offline Bruno of NH

  • Senior Member x2
  • *****
  • Posts: 4825
  • Age: 55
  • Location: Springfield NH
  • Gender: Male
    • Share Post
Re: splitter opinoins
« Reply #10 on: February 07, 2021, 08:06:11 PM »
I would put my money on any of the others mentioned. 
Just my opinion. 
Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

Offline gspren

  • Senior Member x2
  • *****
  • Posts: 2381
  • Age: 69
  • Location: Airville, PA & Fenwick, DE
  • Gender: Male
    • Share Post
Re: splitter opinoins
« Reply #11 on: February 08, 2021, 09:31:02 AM »
I own 2 splitters, both home made, a 3 point hitch splitter that I use occasionally and a big horizontal that needs a pump and motor but when I have a bunch to split I borrow the neighbors Iron & Oak splitter that seems well made. The reason I don't buy one or fix what I have is that the neighbors splitter comes with a powerful teenage boy that I let hunt in my woods. 
Stihl 041, 044 & 261, JD 2355 4X4 w/fel, JD 620, Yamaha Kodiak 400 & trailer, Kubota 400 RTV,  P&M OWB, 75 acres to play.

Offline mike_belben

  • Senior Member x2
  • *****
  • Posts: 8744
  • Location: Middle TN
  • Pulp Friction
    • Share Post
Re: splitter opinoins
« Reply #12 on: February 08, 2021, 10:35:02 AM »
the beauty of community based free trade at work.  A tax free win win
Psalm 37:16

Offline trapper

  • Senior Member x2
  • *****
  • Posts: 1811
  • Age: 77
  • Location: wis
  • Gender: Male
  • I'm new!
    • Share Post
Re: splitter opinoins
« Reply #13 on: February 08, 2021, 11:33:12 AM »
Looking at diferent splitters on line the wolfe ridge and brute force basic models are basicly similar.  Only difference between them is wolfe ridge 4 way is hydraulic and brute force is manualy adjustable. how important to have 4way hydraulic adjustable? 
stihl ms241cm ms261cm  echo 310 400 suzuki  log arch made by stepson several logrite tools woodmizer LT30

Offline doc henderson

  • Senior Member x2
  • *****
  • Posts: 6799
  • Age: 60
  • Location: Hutchinson, Ks
  • Gender: Male
  • Evil Prevails when Good Men Standby and Do Nothing
    • Share Post
Re: splitter opinoins
« Reply #14 on: February 08, 2021, 11:54:22 AM »
I think it depends on how often you will make the adjustment.  if 90% can be done in one position, fine, if each log needs an adjustment then hydraulic.  it would depend on the price difference as well.  I made an 8 way that slips over the face of mine, and I almost never use it.
timberking B 2000, 277c track loader, PJ 32 foot gooseneck, 1976 F700 state dump truck, JD 850 tractor.  2007 Chevy 3500HD dually, home built log splitter 18 horse 28 gpm with 5 inch cylinder and 32 inch split range with conveyor 12 volt tarp motor

Offline barbender

  • Senior Member x2
  • *****
  • Posts: 8137
  • Age: 45
  • Location: Deer River MN
  • Gender: Male
    • Share Post
Re: splitter opinoins
« Reply #15 on: February 08, 2021, 12:24:20 PM »
On my processor that has an adjustable wedge, if there is wood in it, it only goes one way- up. It can't go down because wood is wedged underneath it. So I have learned to sort my wood by size so I don't need to adjust it. Still, when it is time to move it it's nice to hit a lever instead of finding a wrench to loosen a bolt to manually adjust the wedge. BTW, I think the Brute Force entry level model is more comparable to the Eastonmade Ultra- they are set up with a smaller cylinder and still have a larger engine/pump for fast cycle times.
Too many irons in the fire

Online Corley5

  • Senior Member x2
  • *****
  • Posts: 8849
  • Age: 51
  • Location: Wolverine, Michigan USA
  • Gender: Male
  • Wolverine, Michigan
    • Share Post
    • Whittaker Farms
Re: splitter opinoins
« Reply #16 on: February 08, 2021, 12:49:24 PM »
If I was spending $$$ on a splitter the hydraulic wedge adjustment would be important to me.  The wood I process varies greatly in diameter.  I'm constantly adjusting the wedge height on my processor. 
Burnt Gunpowder is the Smell Of Freedom

Offline hedgerow

  • Senior Member
  • ****
  • Posts: 932
    • Share Post
Re: splitter opinoins
« Reply #17 on: February 08, 2021, 01:37:06 PM »
Looking at diferent splitters on line the wolfe ridge and brute force basic models are basicly similar.  Only difference between them is wolfe ridge 4 way is hydraulic and brute force is manualy adjustable. how important to have 4way hydraulic adjustable?
If you are going to spend the money to have a nice splitter. Spent a little more and get the hyd adjustable wedge. You won't be sorry you got the hyd wedge. 

Offline trapper

  • Senior Member x2
  • *****
  • Posts: 1811
  • Age: 77
  • Location: wis
  • Gender: Male
  • I'm new!
    • Share Post
Re: splitter opinoins
« Reply #18 on: February 08, 2021, 03:01:19 PM »
barbender brute force has an option for a 4 1/2 in cylinder.  Planing on a road trip to look at both in person if the weather moderates next week.
stihl ms241cm ms261cm  echo 310 400 suzuki  log arch made by stepson several logrite tools woodmizer LT30

Offline barbender

  • Senior Member x2
  • *****
  • Posts: 8137
  • Age: 45
  • Location: Deer River MN
  • Gender: Male
    • Share Post
Re: splitter opinoins
« Reply #19 on: February 08, 2021, 04:18:32 PM »
For what I do, I'd want the speed of the smaller cylinder. Too many people go with a splitter that will split the biggest ugliest hardwood crotch they can find, when those are such a small part of what you'll probably end up splitting. Half the time they're not worth the fight anyhow. Watch the videos on the Eastonmade Ultra, they split some stuff that is ugly enough, and I believe they use a 3.5" cylinder.
Too many irons in the fire

Online stavebuyer

  • Senior Member x2
  • *****
  • Posts: 1190
  • Location: KY
  • Gender: Male
    • Share Post
Re: splitter opinoins
« Reply #20 on: February 08, 2021, 04:44:21 PM »
I really like the Eastonmade Ultra. If Andrew could incorporate a log lift he probably couldn't keep up with orders. He has done much in a short time advancing splitters. I hope his taking on the Bells processors doesn't cause him to loose interest in splitters. 

Offline hedgerow

  • Senior Member
  • ****
  • Posts: 932
    • Share Post
Re: splitter opinoins
« Reply #21 on: February 08, 2021, 05:46:13 PM »
For what I do, I'd want the speed of the smaller cylinder. Too many people go with a splitter that will split the biggest ugliest hardwood crotch they can find, when those are such a small part of what you'll probably end up splitting. Half the time they're not worth the fight anyhow. Watch the videos on the Eastonmade Ultra, they split some stuff that is ugly enough, and I believe they use a 3.5" cylinder.
I couldn't agreed with this more. I split most of the 15 cord of hedge and locust that I burn a year with a homemade splitter with a four inch cylinder and a 28 GPM two stage pump. I like the speed over the strength of a five or six inch cylinder. 

Offline jmur1

  • Full Member x2
  • ***
  • Posts: 219
  • Wood is King
    • Share Post
Re: splitter opinoins
« Reply #22 on: February 08, 2021, 06:14:03 PM »
Hi trapper:

I have not used any of those heavy build splitter units but I can say from my own processor the multiwedge adjustability is absolutely necessary for my logs.   I have noted that the Eastonmade units have several things that I would include with my splitter (when I make a new one).  

1. Adjustable wedge.
2. Log chunk sits above beam (raised bed) so that adjustable down is possible without clearing previous splits.
3. 1st wedge angled upward so not to drive the chunk down into beam and therefore driving wedge up.
4. Chunk centering so hands can stay clear of operation if desired.
5. Heavy build for real world use.
6. Heavy hydraulic wedge - I have seen alot of damage to these parts and can only imagine how quick some of the lighter units would be ripped apart.

Good luck
jmur1


Easy does it

Online Corley5

  • Senior Member x2
  • *****
  • Posts: 8849
  • Age: 51
  • Location: Wolverine, Michigan USA
  • Gender: Male
  • Wolverine, Michigan
    • Share Post
    • Whittaker Farms
Re: splitter opinoins
« Reply #23 on: February 08, 2021, 06:18:52 PM »
My processor has a 4" cylinder.  Seldom do I come across pieces that can't be split :)
Burnt Gunpowder is the Smell Of Freedom

Offline trapper

  • Senior Member x2
  • *****
  • Posts: 1811
  • Age: 77
  • Location: wis
  • Gender: Male
  • I'm new!
    • Share Post
Re: splitter opinoins
« Reply #24 on: February 08, 2021, 10:31:19 PM »
Good point barbender but no need for speed at my age.  But then again I help a lady split wood that sells campfire wood.  Her deceased husband made a splitter using a vw engine and a 6 or 7 inch cylinder.  He used a single stage pump.  It has about twice the cycle time as my 37 ton box store splitter that has 5 or 6 hp engine.  Times I have to be careful not to stall the engine on her machine.   
stihl ms241cm ms261cm  echo 310 400 suzuki  log arch made by stepson several logrite tools woodmizer LT30

Offline Ed

  • Senior Member
  • ****
  • Posts: 746
  • Age: 57
  • Location: Mid Michigan
  • Gender: Male
    • Share Post
Re: splitter opinoins
« Reply #25 on: February 08, 2021, 11:26:09 PM »
Timberwolf TW-5 here, log lift and adjustable 4 way wedge. It's old enough it has the auto-cycle also.

Very pleased with it, been a trouble free machine.

Ed

Offline gasman1075

  • Full Member x2
  • ***
  • Posts: 107
  • Age: 62
  • Location: Upstate NY
  • Gender: Male
  • I'm lucky
    • Share Post
Re: splitter opinoins
« Reply #26 on: February 09, 2021, 09:59:21 AM »
I agree I had the same luck with all my Timberwolf splitters.

Just a TW1 for now and the immediate future. 
JD 2302R/Stihl MS461/Stihl MS261/ Timberwolf TW-P1/ new left hip /

Offline barbender

  • Senior Member x2
  • *****
  • Posts: 8137
  • Age: 45
  • Location: Deer River MN
  • Gender: Male
    • Share Post
Re: splitter opinoins
« Reply #27 on: February 09, 2021, 12:37:08 PM »
There are a lot rumblings and complaints about the new ownership at TW. I haven't really heard from any Bruteforce owners, I've seen nary a complaint from Wolfe Ridge and Eastonmade customers. 
Too many irons in the fire

Offline Bruno of NH

  • Senior Member x2
  • *****
  • Posts: 4825
  • Age: 55
  • Location: Springfield NH
  • Gender: Male
    • Share Post
Re: splitter opinoins
« Reply #28 on: February 09, 2021, 06:50:34 PM »
Andrew says he has some new things on the horizon for splitters and the extra room at the Bells location will help him cut down on lead times.
Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

Offline woodworker9

  • Senior Member
  • ****
  • Posts: 586
  • Age: 56
  • Location: Northern Illinois
  • Gender: Male
    • Share Post
    • Elite Concrete Raising Co.
Re: splitter opinoins
« Reply #29 on: February 09, 2021, 11:46:46 PM »
Here's my Wolf Ridge 35 high output.  I upgraded to the auto cycle, electric start Honda, and 6 way wedge.  Comes with the 4 way, so I have both.  Hydraulic log lift and wedge up/down are game changers, and so is the 8 second cycle time.  5" cylinder, 4" heavy duty ram.  The return stroke is super fast, and if I stage my logs, or have a helper (which I do), I can split 3 cords an hour.

This is a true 35 ton machine.  I split a lot of HUGE nasty tree service wood, and this thing is incredible.  Nothing it can't split.



 

The other half of the log lift is in the "Stow" position for towing.  Awesome machine.  I split 31 cords of firewood in January this year alone.  Very happy with it.  Well worth the money.

I'd also recommend staying away from the chinese Rugged Made machines, if you want to actually work it hard.  A friend bought one, against my warnings, and is having all kinds of trouble with it.  There's a reason it's so cheap, and that's because every component on it is as cheapo as you can get.
03' LT40HD25 Kohler hydraulic w/ accuset
MS 441, MS 290, New Holland L185

Offline mike_belben

  • Senior Member x2
  • *****
  • Posts: 8744
  • Location: Middle TN
  • Pulp Friction
    • Share Post
Re: splitter opinoins
« Reply #30 on: February 10, 2021, 11:35:18 AM »
i spy a milwaukee milling machine.  8)
Psalm 37:16

Offline Chipmeister

  • member
  • *
  • Posts: 5
  • I'm new!
    • Share Post
Re: splitter opinoins
« Reply #31 on: February 10, 2021, 04:40:38 PM »
I'd also recommend staying away from the chinese Rugged Made machines, if you want to actually work it hard.  A friend bought one, against my warnings, and is having all kinds of trouble with it.  There's a reason it's so cheap, and that's because every component on it is as cheapo as you can get.
Can you please give details about the "all kinds of trouble" your friend is having? 

There is a huge price difference between your 35 which is probably about $17,000 (with lift, adjustable wedge and 6 way) and the ruggedmade which is $4,000 (delivered). My demand is very different. My annual splitting will be about 15 cords per years vs your 30 cords per month or whatever it averages.  

I am 100% on board with Buying American, and do whenever it's possible given all factors. I'm looking at USA made steel toed boots right now. I can find those. However, when any of us need or want to buy a new TV, that is going to be a tough job!

Offline woodworker9

  • Senior Member
  • ****
  • Posts: 586
  • Age: 56
  • Location: Northern Illinois
  • Gender: Male
    • Share Post
    • Elite Concrete Raising Co.
Re: splitter opinoins
« Reply #32 on: February 10, 2021, 11:17:45 PM »
i spy a milwaukee milling machine.  8)
Kearney and Trecker Model 2K, universal horizontal with the 5:3 ratio high speed universal head.  It's a dandy.  They don't make em' like that anymore.
03' LT40HD25 Kohler hydraulic w/ accuset
MS 441, MS 290, New Holland L185

Offline woodworker9

  • Senior Member
  • ****
  • Posts: 586
  • Age: 56
  • Location: Northern Illinois
  • Gender: Male
    • Share Post
    • Elite Concrete Raising Co.
Re: splitter opinoins
« Reply #33 on: February 10, 2021, 11:33:59 PM »
Chipmeister

My 35 HO was $10,500, and I got a discount for paying cash cash.  I don't know if there have been price increases (probably should since he's 6 months out on orders), but the price list is posted on the website.

I am not gonna spend any time discussing a chinese made machine.  He's getting rid of his, as he's sick and tired of it not functioning correctly. Probably gonna lose $1500 or so selling it. I won't help him fix it, as I warned him not to buy it in the first place.  I do a LOT of machining and repair work in my shop, and I don't work on chinese machines.  Buy quality, and cry once.  

I know he tried using it like a commercial machine should be used.....all day long, and he got the hydraulic fluid wayyyyyy too hot because they designed it poorly with that 12 gallon rated hydraulic reservoir, which really is going to hold only 9 to 10 gallons.  The heat probably damaged the seals on his components....don't know for sure, but that's what his problems stem from.  chinese junk.....


03' LT40HD25 Kohler hydraulic w/ accuset
MS 441, MS 290, New Holland L185

Offline mike_belben

  • Senior Member x2
  • *****
  • Posts: 8744
  • Location: Middle TN
  • Pulp Friction
    • Share Post
Re: splitter opinoins
« Reply #34 on: February 11, 2021, 11:35:01 AM »
i spy a milwaukee milling machine.  8)
Kearney and Trecker Model 2K, universal horizontal with the 5:3 ratio high speed universal head.  It's a dandy.  They don't make em' like that anymore.
i had to look that name up.. now i realize that the machine i recall wasn't a milwaukee brand, it was a Kearney and Trecker "milwaukee" model.   interesting past time the industrial revolution was.  definitely defined much of the northeast. 
Psalm 37:16

Offline Arctiva

  • member
  • *
  • Posts: 46
  • Location: Portage wi
  • Gender: Male
    • Share Post
Re: splitter opinoins
« Reply #35 on: February 11, 2021, 12:01:37 PM »
I use a 30" warrior on the bobcat. Paid 2k for splitter I sit in the cab and push a button. I can stack and split at the same time. I tried a 4 way wedge but was like campfire wood and alot of waste so stuck with the single wedge.

At 44 years old I'm trying to work smarter and dont want all the extra handling of the wood. Alot of the wood I handle is 24"+ around so made sense to get bobcat splitter since I had a bobcat already 

 

Offline cutterboy

  • Senior Member x2
  • *****
  • Posts: 1076
  • Age: 73
  • Location: Barre, Ma.
  • Gender: Male
  • Sometimes trees fall where they want to.
    • Share Post
Re: splitter opinoins
« Reply #36 on: February 12, 2021, 07:01:49 AM »


At 44 years old I'm trying to work smarter 
OMG Arctiva, you are so old!  :D :D  I wish I could throw wood around now like I could when I was 44. :-\
But seriously Arctiva, you are smart to take care of your back now because you'll still want to use it when you're 72.

Offline trapper

  • Senior Member x2
  • *****
  • Posts: 1811
  • Age: 77
  • Location: wis
  • Gender: Male
  • I'm new!
    • Share Post
Re: splitter opinoins
« Reply #37 on: February 17, 2021, 09:06:25 PM »
Wife and I drove up to look at the wolfe ridge splitters in person.  Put a deposit on a 28 pro.  looks great now to wait until the end of june for it.  The desk chris uses is made from a big slab.
stihl ms241cm ms261cm  echo 310 400 suzuki  log arch made by stepson several logrite tools woodmizer LT30

Offline hedgerow

  • Senior Member
  • ****
  • Posts: 932
    • Share Post
Re: splitter opinoins
« Reply #38 on: February 18, 2021, 12:04:48 PM »
Wife and I drove up to look at the wolfe ridge splitters in person.  Put a deposit on a 28 pro.  looks great now to wait until the end of june for it.  The desk chris uses is made from a big slab.
I think you will like your new {TOY} tool. It will give you something to look forward to and get your mine on this weather. June will be here before you know it. 


Share via delicious Share via digg Share via facebook Share via linkedin Share via pinterest Share via reddit Share via stumble Share via tumblr Share via twitter

xx
Rugged Split 37 ton splitter/splitter suggestions?

Started by jbos333 on Firewood and Wood Heating

14 Replies
9041 Views
Last post November 14, 2014, 08:57:15 AM
by ckhenshaw4
xx
Hand powered log splitter, the Smar-Splitter??

Started by Chuckolicious on Firewood and Wood Heating

14 Replies
6915 Views
Last post March 23, 2010, 01:50:09 PM
by Ernie
xx
35 ton log splitter

Started by MRowsh on For Sale

4 Replies
1878 Views
Last post August 08, 2013, 12:03:17 PM
by MRowsh
xx
Log splitter

Started by brad83091 on Firewood and Wood Heating

7 Replies
1459 Views
Last post May 16, 2014, 08:40:08 PM
by 711ac
 


Powered by EzPortal