Video. Husqvarna 350 to 346OE 42mm Cylinder & Build Notes ( & Coyote's)

[weimedog]

Have seen some discussion on 350's... figured it might be interesting to share trials and tribulations working on a few... one of several video's on that subject.

Basically blended a 346 top end to a 350. Discussed issues to solve along with other observations relative to those older 350's. Might be entertaining to someone...

From this summers projects...

https://www.youtube.com/watch?v=7GR_lFjAgfU&index=10&list=PLtw-MqiEnI4FqI4p_gjbHg3fsoykcdazS

[SawTroll]

No "like" option here, so I post this instead!   8)

[chainsawwhisperer]

Hi Walt, I just wanted to publicly thank you for the advice on my 350. You were right the lower 1/2 of the case was warped, Sanded it smooth with some 600 and a flat block and reassembled it..It now runs great!  The darn saw had sat on the shelf for almost 2 years after the rebuild with an air leak that had me stumped!
P.S. txt me or PM me your cell# I have the wrong one in my phone.
  Thanks again!   Jim