Text only | Text with Images

The Forestry Forum

Sponsor News => Nyle Systems => Topic started by: K-Guy on April 20, 2020, 10:15:18 AM

Title: KilnTech Videos
Post by: K-Guy on April 20, 2020, 10:15:18 AM
K-guy aka Stan Krahn posts videos on kiln maintenance, repair and improvements. You can contact me at skrahn@nyle.com.

Here's our Intro for KilnTech! - YouTube (https://youtu.be/ivgQrkGRF0E)
Title: Re: KilnTech Videos
Post by: K-Guy on May 04, 2020, 02:11:04 PM
This weeks video.

KilnTech Episode 1: Unboxing an L200 - YouTube (https://youtu.be/oaqKSKyBHGg)
Title: Re: KilnTech Videos
Post by: Walnut Beast on May 04, 2020, 05:46:34 PM
Quote from: K-Guy on May 04, 2020, 02:11:04 PM

This weeks video.

KilnTech Episode 1: Unboxing an L200 - YouTube (https://youtu.be/oaqKSKyBHGg--)
Nice job Stan👍👍
Title: Re: KilnTech Videos
Post by: K-Guy on May 21, 2020, 08:42:48 AM

In this episode your favorite kiln guy talks about L53 and L200S kiln controls.  :D
https://www.youtube.com/watch?v=1xTTf4UwXGw (https://www.youtube.com/watch?v=1xTTf4UwXGw)
Title: Re: KilnTech Videos
Post by: Southside on May 21, 2020, 09:29:49 AM
And yet no "crunch"  :D
Title: Re: KilnTech Videos
Post by: K-Guy on June 02, 2020, 07:59:41 AM

This week I cover the L200M control. Enjoy
KilnTech Episode 3: L200M Controls - YouTube (https://youtu.be/-NYFGY_8LS4)
Title: Re: KilnTech Videos
Post by: K-Guy on June 15, 2020, 03:57:39 PM

This weeks episode

KilnTech Episode 4: Power Vent Kit - YouTube (https://youtu.be/fzABg7M9hYA)
Title: Re: KilnTech Videos
Post by: K-Guy on August 17, 2020, 01:23:09 PM

Here's my latest video

KilnTech Episode 5: Wiring the L53 and L200 control boxes - YouTube (https://youtu.be/WHjG4YlK4YQ)
Title: Re: KilnTech Videos
Post by: K-Guy on October 27, 2020, 08:40:42 AM

in this episode I show how to setup the dry bulb/wet bulb for the L200 and L53.

KilnTech Episode 6: Wet bulb/ Dry bulb placement - YouTube (https://www.youtube.com/watch?v=DdeP8bKrTms)
Title: Re: KilnTech Videos
Post by: K-Guy on December 03, 2020, 07:47:11 AM

This episode I talk about the fan kit setup.

KilnTech Episode 7: L53/L200 Fan Kits - YouTube (https://www.youtube.com/watch?v=JIYYDp1aM5s)
Title: Re: KilnTech Videos
Post by: K-Guy on January 08, 2021, 01:26:52 PM

In this episode I talk about the heat booster

KilnTech Episode 8: L53/L200 Heat Booster - YouTube (https://www.youtube.com/watch?v=WgX1r-XKcPg&list=PLqigsI8-7_5gZaK7GXFIM-pSPbFJpOceH&index=3)
Title: Re: KilnTech Videos
Post by: K-Guy on January 08, 2021, 01:27:39 PM

This one is about the drain line on the kiln.

KilnTech Episode 9: L53/L200 Drain Line Installation - YouTube (https://www.youtube.com/watch?v=Opdv2_XvwnU&list=PLqigsI8-7_5gZaK7GXFIM-pSPbFJpOceH&index=2)
Title: Re: KilnTech Videos
Post by: K-Guy on January 08, 2021, 01:28:31 PM

In this episode I talk about the high pressure reset.

KilnTech Episode 10: High Pressure switch reset for L53/L200 - YouTube (https://www.youtube.com/watch?v=33RFb9klnE4&list=PLqigsI8-7_5gZaK7GXFIM-pSPbFJpOceH&index=1)
Title: Re: KilnTech Videos
Post by: K-Guy on February 09, 2021, 11:57:20 AM

This episode is a common error message

KilnTech Episode 11: L200 Error Message - YouTube (https://www.youtube.com/watch?v=YgItPAcOm8M&list=PLqigsI8-7_5gZaK7GXFIM-pSPbFJpOceH&index=1)
Title: Re: KilnTech Videos
Post by: K-Guy on May 14, 2021, 12:19:51 PM
This episode is for older L200, L50 and larger kilns with RTD sensors.

KilnTech Episode 12: Replacing the RTD Sensor - YouTube (https://www.youtube.com/watch?v=C42KuMyZ9SE)
Title: Re: KilnTech Videos
Post by: K-Guy on September 02, 2021, 09:39:54 AM

We've changed the brand and style of contactors we use and this will help with changing the L200/KD250 compressor contactor.

KilnTech - Episode 13 L200 Compressor Contactor Replacement - YouTube (https://www.youtube.com/watch?v=iTTUF7EDJNg&list=PLqigsI8-7_5gZaK7GXFIM-pSPbFJpOceH&index=1)
Text only | Text with Images