The Forestry Forum
General Forestry => Forestry and Logging => Topic started by: snowstorm on July 20, 2019, 08:02:28 PM
being to cheap to buy a track tightener i built one. monday is test day. i used 1" grade 8 threaded rod. used 1/2 by 3 by 6"flat bar to make the part the rod goes through. then since i have 2 different style tracks i needed bolt on ends that go over the track pad. on the bench with 2 pads i took out a while back its fits great. time will tell. total cost under $50
Let me know if you get your fingers caught, I'll come drink a beer and observe🧐
Snowstorm you know your a logger when you prefab everything you need :) Good job !