iDRY Vacuum Kilns

Sponsors:

Foley Belsaw M14

Started by dthreatt11, February 10, 2020, 11:19:40 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

dthreatt11

Just purchased a Foley Belsaw M14 that was never assembled by original owner. Seems like we have everything except the cable to drive the carriage. Anyone know the diameter and a guess at the length needed. Thanks in advance. 

moodnacreek

1/4 to 5/16". I guess you could pull a string or wire to mock up the cable. 
I have also forgotten how many wraps around the drum but 4 should work.

moodnacreek

If you go to my gallery you can view the cable drum I made years ago on a bellsaw. The set up that comes on that mill is really not right. The A belt running off the center of the mandrel hardly works. It needs to be a B belt and mounted outside the way timbers.

Brian_Rhoad

The Belsaw manual shows 1/4" x 66'. 

You can download the manual here: http://vintagemachinery.org/pubs/detail.aspx?id=1050

dthreatt11

Thanks man. I actually have that manual printed out but I guess I was overlooking it in the list. I see it now. Thanks again. I will prolly have many more questions

Thank You Sponsors!