MS 600 Skip Chain High Output Oiler

[s grinder]

I have a MS 660 with a 32" bar i use to cut down stumps if needed, before i grind them,i've seen in this forum where a full skip  semi chisel chain would be better for my application.Where can i buy one[Stihl] and can get one with out changing my bar and sprocket?Also mentioned before[Rocky]that they make a high output oil pump for the chain oiler.Does anyone know of this or have a part number.
Thanks Joe

[Al_Smith]

You won't need skip on a 32" bar with an 066 but if you so desire  Baileys sells semi in skip .


The high output oiler is Australian and the numbers are : pump -1122-640-3201

                                                                                    piston   1122-647-0602

                                                                                control bolt 1128-647-4802


Depending on the dealer most likely around 80 bucks .

[s grinder]

Thanks Al