LT 15 power feed install question

[Woodslabs]

Hi all,

So i am assembling my Lt 15 wide and ran into a snag. When attaching to the battery the power feed red cable will not fit over the battery + prong.  Its almost like whoever assembled the battery put the thin prong on the negative terminal and the fat one on the positive terminal.  Anyone have any idea?  Also on the red wire there is a small box.  Where does that mount?

Any help would be appreciated.

Thanks,
Mike

[MartyParsons]

Hello,
The small box is the fuse. I would assume when the assembled the wire they grabbed the wrong Eye loop. You can just cut the loop and spread the hole or replace the end. I think the fuse and wire will tuck into the battery box cover.
Hope this helps.
Marty