re tip jig

[c44u]

i have looked at there web site and all over the internet. can not find price on re-tip jig for circular sawmill. can anyone give me a sit , or tell me about how much they cost. thank you jim

[Jeff]

What's a re-tip jig? ( I ran a circle mill for 25 years)

[c44u]

10" Peterson WPF

Re-tipping jig
have seen them talk about but can not find one. for fixen sawblade .

well i found out it cost $ 309.00 usd

[Fla._Deadheader]

 I believe it's for a Swinger circle blade ???  You re-tip with Carbide .   I would like this info, also. I am using the Lucas Blade for Homey's twin cousin. ;) ;D ;D

[Ernie]

Me too, it costs me $25.00 per tip for my mill

[Fla._Deadheader]

  The tips are around $1.25 each. All ya gotta do is braze or silver solder them in place with the jig .

[sawhead]

Here is a link to one site that has them ,dont have a clue as to the price but like fdh stated its just brazing or silver solder , some of the tips come with the solder on the tips ,just clamp and heat and then check with indicator.http://www.pacific-hoe.com/products/jacobsen/tipfix.htm

[Fla._Deadheader]

  Good link, Sawhead.  Thanks ;) ;D

[Ernie]

Sawhead

Thanks for the link, it's just what I wanted.

I emailed them suggesting that they might like to sponsor our forum smiley_angel02_wings

[c44u]

thank you for the link. good find