iDRY Vacuum Kilns

Sponsors:

Frozen logs w/a Peterson WPF 8

Started by Back40x2, March 18, 2005, 10:54:16 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Back40x2


   Hey all!   Looking to see if I should beware of frozen logs with the swingblade ???   I am not looking for any surprises my first time upto bat persay :o :o :o

   Any advise would be appreciated ;)
My JD 4120 Loader/Hoe/fransgard winch, a 10,000 pound Warn winch, STIHL 460,  Timberking 1600,  Lots of logs, a shotgun, rifle, my German Shorthaired Pointers and a 4-wheel drive, is all this Maine boy needs to survive!! Oh Yeah, and my WIFE!!!!!!

Fla._Deadheader


  Jump right on in and " git 'er done".  ;D ;D ;D ;D ;D :D :D :D
All truth passes through three stages:
   First, it is ridiculed;
   Second, it is violently opposed; and
   Third, it is accepted as self-evident.

-- Arthur Schopenhauer (1788-1860)

Ianab

Seriously ..
I dont think there will be a problem...
But dont ask us Kiwis or Aussies, we dont go out sawing if it's that cold  :D

Ian
Weekend warrior, Peterson JP test pilot, Dolmar 7900 and Stihl MS310 saws and  the usual collection of power tools :)

Captain

There is no particular problem with sawing frozen logs.   They do not cut as fast, when solid frozen there is some slowdown required, nothing tremendous.  There is not a lot of difference in softwood. Having said that, the first time I made a dull blade walk by "forcing it" was in a frozen piece of White Oak on an 8" vertical cut.  The blade went out for retensioning after that exercise... chalked that one up as a learning experience  ::)

Back40x2


   Thanks everyone,  and yes Jeff Ima gonna git 'er done ;)
My JD 4120 Loader/Hoe/fransgard winch, a 10,000 pound Warn winch, STIHL 460,  Timberking 1600,  Lots of logs, a shotgun, rifle, my German Shorthaired Pointers and a 4-wheel drive, is all this Maine boy needs to survive!! Oh Yeah, and my WIFE!!!!!!

Thank You Sponsors!