iDRY Vacuum Kilns

Sponsors:

Petroglide has anyone tried it

Started by Quebecnewf, April 19, 2005, 08:37:12 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Quebecnewf

April 19, 2005, 08:37:12 PM
There is a bandsaw lubricant called Petroglide. Made by Petro Canada Has anyone out there tried it and if so what are your thoughts. I'm still using water but I am sure there are better things

Paul

Gord From Emsdale ON

#1
April 20, 2005, 07:21:06 AM
I've never seen it here in Ontario, but then again, I don't buy Petro Canada gas.

SwampDonkey

#2
April 20, 2005, 02:35:14 PM
I've never heard of it either, most Petro Canada stations have closed in my local area. Is it some type of graphite based lube?
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

Quebecnewf

#3
April 21, 2005, 07:05:28 AM
I'm sure its not to be had at your local gas station. I called Petro Canada and got a price of about 600.00 drum. Needless to say I have not bought yet. A french web page of a guy who built a small semi vertical bandmill says it's the best thing to use. At that price it should saw the log for you

Print
Go Up Pages1
User actions

Thank You Sponsors!