iDRY Vacuum Kilns

Sponsors:

Adding an edger to the operation

Started by Crossroads, February 14, 2021, 12:31:17 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Crossroads

February 14, 2021, 12:31:17 PM
Through a friend of a friend I found a used edger. It's a Valley je 2/24 and has been setting idle for the last 20 years in a garage. So, it looks like I'll be making a trip back to the Oregon coast to look at it and hopefully bring it home. The starting price is 2k and has a few extras that come with it. 
With the right fulcrum and enough leverage, you can move the world!

2017 LT40 wide, BMS250 and BMT250,036 stihl, 2001 Dodge 3500 5.9 Cummins, l8000 Ford dump truck, hr16 Terex excavator, Valley je 2x24 edger, Gehl ctl65 skid steer, JD350c dozer

Southside

#1
February 14, 2021, 12:33:09 PM
A good edger makes an amazing difference in your operation.  I would be lost without mine.  
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

47sawdust

#2
February 14, 2021, 03:01:04 PM
I believe that is the edger WM copied theirs from.
Originally made in New Brunswick so it has traveled some.
Good luck.
Mick
1997 WM Lt30 1999 WM twin blade edger Kubota L3750 Tajfun winchGood Health Work is my hobby.

Crossroads

#3
February 14, 2021, 05:33:25 PM
Hopefully they copied it close, I understand parts can be hard to find. If something fails, I wouldn't be opposed to converting it to Woodmizer 
With the right fulcrum and enough leverage, you can move the world!

2017 LT40 wide, BMS250 and BMT250,036 stihl, 2001 Dodge 3500 5.9 Cummins, l8000 Ford dump truck, hr16 Terex excavator, Valley je 2x24 edger, Gehl ctl65 skid steer, JD350c dozer

Crossroads

#4
February 14, 2021, 05:34:46 PM
I've never been around an edger, so I'm looking forward to it. 
With the right fulcrum and enough leverage, you can move the world!

2017 LT40 wide, BMS250 and BMT250,036 stihl, 2001 Dodge 3500 5.9 Cummins, l8000 Ford dump truck, hr16 Terex excavator, Valley je 2x24 edger, Gehl ctl65 skid steer, JD350c dozer

Crossroads

#5
February 21, 2021, 06:22:27 PM
Picked up the edger this weekend, now I just need about 14" of snow to melt so I can try it. 
With the right fulcrum and enough leverage, you can move the world!

2017 LT40 wide, BMS250 and BMT250,036 stihl, 2001 Dodge 3500 5.9 Cummins, l8000 Ford dump truck, hr16 Terex excavator, Valley je 2x24 edger, Gehl ctl65 skid steer, JD350c dozer
Print
Go Up Pages1
User actions

Thank You Sponsors!