- Welcome to The Forestry Forum.
How are things going?
Recent posts
#11
Sawmills and Milling / Re: Did something dumb today.
Last post by doc henderson - Today at 12:24:17 PMI hate the clearish fuel filters. I stare at it only appearing 1/3rd full and wonder why all the air does not get out. It runs fine. I recently had to replace rotten fuel line. about 6 feet with the power chain. It had a yellow color imparted to the gas, so I flushed it out. I spent about 5 minutes with a little cup and fuel line on each end to get the air out. I put it in line and remembered the long line to the tank was not primed and full of air. Not worth getting the smell of gas on my hands, but I may try again. I may clamp the bottom of the line to the tank and try again. Why? I do not know. It just seems it should be full of fuel.
#12
Forestry and Logging / Re: JDM Mini Trucks
Last post by Hilltop366 - Today at 12:00:42 PMI guess a feller could do a chop job on a Chevy Tracker/ Suzuki Vitara and make it into a cab/truck bed. Get 4 door so you can have a longer box. (I think they are the ones with a Hi/low transfer case)
#13
Sawmills and Milling / Re: Did something dumb today.
Last post by Resonator - Today at 11:50:41 AMI've also heard if you leave the gas tank valve off on your mill, there will be just enough gas in the carb to start it and get about a foot into a cut before the engine dies. 
#14
Sawmills and Milling / Re: Did something dumb today.
Last post by Resonator - Today at 11:47:33 AMI've heard on newer vehicles the drive line parts are considered "one time only use" parts. If you unbolt it, they want you to throw it in the scrap bin and get a new one.
#15
Sawmills and Milling / Re: lT50 Shipped 1st Week of A...
Last post by SawyerTed - Today at 11:38:55 AMHere's hoping you were able to saw to your heart's content yesterday and for a long string of trouble free and safe sawing days!
There few machines I've enjoyed operating more than my LT50.
There few machines I've enjoyed operating more than my LT50.
#16
The Outdoor Board / Re: whippoorwill
Last post by SwampDonkey - Today at 11:21:25 AMUsed to be some at grandfather's camps, big w. pine trees and rocky bluffs up there.
#17
General Board / Re: Happy Mother's Day
Last post by SwampDonkey - Today at 11:19:42 AMMother and I are going for a ride up around the mountain today, through Easton, Presque Isle and back through Bridgewater.
#18
Chainsaws / Re: Two stroke oil ratio's- Sa...
Last post by Southside - Today at 10:44:09 AM#6 oil there BB, the secret is to use #6. 
But seriously - what would you run 75:1 in? Never heard of that.
But seriously - what would you run 75:1 in? Never heard of that. #19
Sawmills and Milling / Re: Did something dumb today.
Last post by Southside - Today at 10:38:35 AMI took it as more of the line from The Six Million Dollar Man "We can rebuild him. We have the technology. We can make him better than he was..."
#20
Forestry and Logging / Re: is there a best time to ha...
Last post by woodroe - Today at 10:08:37 AMYeah and nail it together green. I wouldn't sticker any of it.
Stuff is brittle when dry . Especially the ends.
Stuff is brittle when dry . Especially the ends.
