iDRY Vacuum Kilns

Sponsors:

Split a few pieces of wood Saturday - Pics

Started by Busy Beaver Lumber, April 15, 2014, 07:17:29 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Busy Beaver Lumber

Well firewood bundling season is upon us and this saturday we went and picked up a well loaded trailer of logs that had been aged about 2 years and brought them back to the building. Fortunately, the firewood supplier has a very nice skid steer with even nicer grapple to make loading a snap. He loaded that trailer about 4 feet high and we had to strap the load down real good. Fortunately we were only going about 2 miles.



 


After milling a nice pile of Ash on the woodmizer LT-10, we cut the logs to firewood length and then I dug in and fired the splitter up. Yes that is me running the splitter



 

The picture below was taken when I was about half done with splitting the wood. At the end of the day ( after about 6 hours of splitting)  I had around 4 cords of nice dry wood ready to bundle this week.



 
Woodmizer LT-10 10hp
Epilog Mini 18 Laser Engraver with rotary axis
Digital Wood Carver CNC Machine
6 x 10 dump trailer
Grizzly 15in Spiral Cut Surface Planer
Grizzly 6in Spiral Cut Joiner
Twister Firewood Bundler
Jet 10-20 Drum Sander
Jet Bandsaw



Save a tree...eat a beaver!

Thank You Sponsors!