iDRY Vacuum Kilns

Sponsors:

Hello from Maine

Started by PostandDream, August 31, 2013, 09:25:22 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

PostandDream

Thanks for the welcome all.  This forum must be the most positive on the internet!   Nothing but optimism and encouragement :)

I'll be posting some questions early next week, and already look forward to the insight here.


Peter Drouin

Wellcome to the FF
Ross and Maureen are good people
all I can say is new or use buy all the mill you can
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

PostandDream

Yeah,   I've read many times here about buy bigger than you think you'll need.   I was going towards an LT10,  but my wife and thinks I should go LT15.   And I'm sure all of you guys will agree with my wife!

Just waiting on finalizing the house plans and loans before I buy one,  so I don't bite off more than I can chew.

customsawyer

I don't think I have ever heard some one say "I should have bought a smaller mill with less HP" ;D.
Two LT70s, Nyle L200 kiln, 4 head Pinheiro planer, 30" double surface Cantek planer, Lucas dedicated slabber, Slabmizer, and enough rolling stock and chainsaws to keep it all running.
www.thecustomsawyer.com

goose63

What part of western Montana? St Regis is where I started out in this life welcome to the forum goose
goose
if you find your self in a deep hole stop digging
saw logs all day what do you get lots of lumber and a day older
thank you to all the vets

Nomad

Quote from: PostandDream on September 08, 2013, 03:29:05 PM
Yeah,   I've read many times here about buy bigger than you think you'll need.   I was going towards an LT10,  but my wife and thinks I should go LT15.   And I'm sure all of you guys will agree with my wife!

Just waiting on finalizing the house plans and loans before I buy one,  so I don't bite off more than I can chew.

     Sometimes it's better to take a little bit bigger bite than you think you want, rather then to walk away hungry.
Buying a hammer doesn't make you a carpenter
WoodMizer LT50HDD51-WR
Lucas DSM23-19

GDinMaine

I think it's a bad idea to discount your wife's suggestion especially if she wants you to get a larger machine. 
It's the going that counts not the distance!

WM LT-40HD-D42

Okrafarmer

Quote from: goose63 on September 08, 2013, 06:21:56 PM
What part of western Montana? St Regis is where I started out in this life welcome to the forum goose

When he said "Western Mountain area" I took him to mean the western mountains of Maine. But I could be wrong.

Welcome to the Forum, P+D! I used to live in central Maine. By "20 minutes west of Bangor" I'm guessing that's around Newport somewhere. I grew up in Clinton, old exit 37, new exit 138.
He that dwelleth in the secret place of the most High shall abide under the shadow of the Almighty. Psalm 91:1

Operating a 2020 Woodmizer LT35 hydraulic for Upcountry Sawmill, Dacusville, SC

Now selling Logrite tools!

Writing fiction and nonfiction! Check my website.

mesquite buckeye

Welcome and good luck with the mill. ;D
Manage 80 acre tree farm in central Missouri and Mesquite timber and about a gozillion saguaros in Arizona.

dboyt

P&D, welcome to the forum!  I built out post and beam home over 30 years ago with lumber milled from our property.  Lots of good sawmills out there.  Check the sponsors link to the left.  No doubt the time will come when you will wish you had a bigger mill.  Same with tractors.  I've been using a 22 hp 8N Ford with front end loader for years.  With a log arch and PTO winch, it does fine.  You find ways to get things done with limited power, though it takes more time.  It is also important to have provisions for stacking and storing the lumber until you are ready to use it.  Good luck, and let us know  how things progress.
Norwood MX34 Pro portable sawmill, 8N Ford, Lewis Winch

PostandDream

Quote from: Okrafarmer on September 08, 2013, 09:51:26 PM
Quote from: goose63 on September 08, 2013, 06:21:56 PM
What part of western Montana? St Regis is where I started out in this life welcome to the forum goose

When he said "Western Mountain area" I took him to mean the western mountains of Maine. But I could be wrong.

Welcome to the Forum, P+D! I used to live in central Maine. By "20 minutes west of Bangor" I'm guessing that's around Newport somewhere. I grew up in Clinton, old exit 37, new exit 138.


Correct,  the western mountains of Maine!   And yes I'm VERY close to Newport,  right now I'm living off the Newport exit,  but the new house and land is off the Plymouth exit :)

nk14zp

Belsaw 36/18 duplex mill.
Belsaw 802 edger.
http://belsawsawmills.freeforums.org/

mesquite buckeye

Or the 40 with the accuset and debarker. ;D
Manage 80 acre tree farm in central Missouri and Mesquite timber and about a gozillion saguaros in Arizona.

Woodhauler

Quote from: PostandDream on September 11, 2013, 05:02:57 PM
Quote from: Okrafarmer on September 08, 2013, 09:51:26 PM
Quote from: goose63 on September 08, 2013, 06:21:56 PM
What part of western Montana? St Regis is where I started out in this life welcome to the forum goose

When he said "Western Mountain area" I took him to mean the western mountains of Maine. But I could be wrong.

Welcome to the Forum, P+D! I used to live in central Maine. By "20 minutes west of Bangor" I'm guessing that's around Newport somewhere. I grew up in Clinton, old exit 37, new exit 138.


Correct,  the western mountains of Maine!   And yes I'm VERY close to Newport,  right now I'm living off the Newport exit,  but the new house and land is off the Plymouth exit :)
Ok were abouts off the plymouth exit? I am close to there!
2013 westernstar tri-axle with 2015 rotobec elite 80 loader!Sold 2000 westernstar tractor with stairs air ride trailer and a 1985 huskybrute 175 T/L loader!

thecfarm

I was just up there on route 2 heading for Smyrna  Mills last weekend. A 4 hour ride. A very nice drive.
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Mooseherder

Welcome to the Forestry Forum. :)
There was a detour off I-95 northbound about a month ago that dumped us into Route 2.  I sure was happy that happened.  It was a beautiful ride.  Did you see the guy who had the 20 or so refurbished Plow trucks along with the Skidder set up on the pedestal south of Houlton?

PostandDream

Quote from: Mooseherder on September 11, 2013, 07:58:07 PM
Welcome to the Forestry Forum. :)
There was a detour off I-95 northbound about a month ago that dumped us into Route 2.  I sure was happy that happened.  It was a beautiful ride.  Did you see the guy who had the 20 or so refurbished Plow trucks along with the Skidder set up on the pedestal south of Houlton?

No I didn't!   Sounds like quite a display.

PostandDream

Quote from: nk14zp on September 11, 2013, 06:30:19 PM
I'd get the lt28.

When I went to the open house I brought my father in law.   I walked right up to the 10 and 15 to show him what they looked like, and his first words were "Those are stupid!   You need one like that!"  And pointed to the lt28...  If only money weren't an option.

PostandDream

Quote from: Woodhauler on September 11, 2013, 07:11:04 PM
Quote from: PostandDream on September 11, 2013, 05:02:57 PM
Quote from: Okrafarmer on September 08, 2013, 09:51:26 PM
Quote from: goose63 on September 08, 2013, 06:21:56 PM
What part of western Montana? St Regis is where I started out in this life welcome to the forum goose

When he said "Western Mountain area" I took him to mean the western mountains of Maine. But I could be wrong.

Welcome to the Forum, P+D! I used to live in central Maine. By "20 minutes west of Bangor" I'm guessing that's around Newport somewhere. I grew up in Clinton, old exit 37, new exit 138.


Correct,  the western mountains of Maine!   And yes I'm VERY close to Newport,  right now I'm living off the Newport exit,  but the new house and land is off the Plymouth exit :)
Ok were abouts off the plymouth exit? I am close to there!

I'm west of the exit in Etna.    I never knew there was a Jackson, Maine!   And we looked at land in Dixmont, Troy, Plymouth, Detroit, and pretty much everywhere around you.

thecfarm

PostandDream,Was that at Chesterville open house this year? Seem like April? I forgot. I was there with 2 other FF members. We was busy looking too. Those LT10 and 15 will saw nice lumber. FF members have both.
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

PostandDream

Yes this year,  I've already forgotten the date as well!   I remember it was sunny and cool.   And lots of orange  ;D

nk14zp

The lt28 is on sale and not much more than the lt15go.
Belsaw 36/18 duplex mill.
Belsaw 802 edger.
http://belsawsawmills.freeforums.org/

Thank You Sponsors!