iDRY Vacuum Kilns

Sponsors:

Solo 603 ( Cut from other video's )

Started by weimedog, December 26, 2020, 01:56:43 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

weimedog

This is a saw that needs to be front and center, not some filler or side show in another video focused on something else. SO in that spirit I cut some video time from other video's where I had this 603 and stuck together a Just 603 video.. :)

Solo 603 A 103cc BIG Saw ( Re-cut from prior video's ) This Saw Needs It's OWN Video! So Here It Is. - YouTube
Husqvarna 365sp/372xpw Blend, Jonsered 2171 51.4mm XPW build,562xp HTSS, 560 HTSS, 272XP, 61/272XP, 555, 257, 242, 238, Homelite S-XL 925, XP-1020A, Super XL (Dad's saw); Jonsered 2094, Three 920's, CS-2172, Solo 603; 3 Huztl MS660's (2 54mm and 1 56mm)

sawguy21

I have seen very few Solos, they were virtually unknown here although the sprayers were popular with orchardists.
old age and treachery will always overcome youth and enthusiasm

beav

I have the 80cc variant of that saw. It is barely broken in, has sat for decades. It was more than I needed or could really handle. I got a good deal on it and it was too cool to pass up.
If anyone is interested I would gladly sell it (adhering to forum rules). It needs either a spark plug and/or ignition module. Otherwise hardly used

hedgerow

I ran Solo saws for years had a pair of 656 and a 694. They were great saws but the parts started drying up. I sold the pair of 656 first and then about two years ago sold the 694 it was to the point finding air filters got to be a problem. I have went to mostly Stihl's now. 

Thank You Sponsors!