iDRY Vacuum Kilns

Sponsors:

Amazing Helmut Cam Video of a Race

Started by weimedog, August 26, 2006, 11:36:55 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

weimedog

I am a new DSL subscriber...amazing difference I didn't know what I was missing!!

There is a website that I visited for a while but was NEVER able to see the pictures and video's

You North Easterners might appreciate this...its a Quad place but racing is racing:

Website is: "www.thequadbuilder.com"

You may have to register...but whatever. Check out the Video's of AGP round Number 9.

You won't be dissapointed.
Husqvarna 365sp/372xpw Blend, Jonsered 2171 51.4mm XPW build,562xp HTSS, 560 HTSS, 272XP, 61/272XP, 555, 257, 242, 238, Homelite S-XL 925, XP-1020A, Super XL (Dad's saw); Jonsered 2094, Three 920's, CS-2172, Solo 603; 3 Huztl MS660's (2 54mm and 1 56mm)

weimedog

I'm not certain it was clear how to get to the helmet cam video..so

This Video is located at:

www.thequadbuilder.com

And I didn't mention the steps to get to the right Video...they are:

Pick "Atlantic Grand Prix Logan Farm Video"
Then select "Helmet Cam Footage......."

(Not trying to insult anyone's intel or computer savey!!! Just had an e-mail from someone saying they didn't find the helmet cam one...I thought it was labeled clearly)

Husqvarna 365sp/372xpw Blend, Jonsered 2171 51.4mm XPW build,562xp HTSS, 560 HTSS, 272XP, 61/272XP, 555, 257, 242, 238, Homelite S-XL 925, XP-1020A, Super XL (Dad's saw); Jonsered 2094, Three 920's, CS-2172, Solo 603; 3 Huztl MS660's (2 54mm and 1 56mm)

Mooseherder

Looks like too many trees around to be racing.  smiley_mc_helmet hurt_smiley hurt_smiley

Tom

This will be a pretty good example of why we don't link to other websites.  In a couple of years, these videos will probably be taken off of that website to make room for more. These posts will still be on the Forestry Forum and be of no use.   

I wonder.......   Maybe if we were to turn one of those 4 wheelers upside down and put a saw blade on it, we could make it more useful and saw some of those trees.  ;D

weimedog

After spending 17-18 years in the workstation & CAD/CAM business the one thing I learned is:

In a few years it won't matter. Hopefully there is some pruning that happens over time. Don't think anyone has unlimited space. Not yet at least. I only have 3 gig of RAM and 180 gig of DISK.... ;)

At the rate the cost of memory and the amount of memory available changes it may yet again, for other reasons; not matter.  ::)


This is Just a little entertainment..

Bunch of Quads racing through my horse trails...and those trees are my source of firewood and lumber to build horse stalls. We have almost 100 acres of hardwood there. Hard Maple, Hickory, Oak, and Ash mixed in with the scrub wood.

Another 80 of Hay fields and the rest of the 266 is pasture.

Nice for chainsaws as well.

QUADS and trees? Tree win. Especially the big ones. ;D
Husqvarna 365sp/372xpw Blend, Jonsered 2171 51.4mm XPW build,562xp HTSS, 560 HTSS, 272XP, 61/272XP, 555, 257, 242, 238, Homelite S-XL 925, XP-1020A, Super XL (Dad's saw); Jonsered 2094, Three 920's, CS-2172, Solo 603; 3 Huztl MS660's (2 54mm and 1 56mm)

Thank You Sponsors!