Good Youtube Videos

[4x4American]

Well, all the time I run into good vidjas on youtube, and I think it'd be cool to have a spot to put them, so that we can share videos we thought were good, and on a day when it's -40°F outside and we're inside feeding the woodstove, we can waste alot of time on the interweb...or whatever floats your goat.




I'll start, this guy has some very interesting videos:


https://www.youtube.com/watch?v=Y_lHOpqwDI4

[Kbeitz]

For years I have been going to these two url's. Someone tries to
post the best videos of the week off the web.

http://www.wimp.com/?old=1/

http://www.flixxy.com/most-recent-videos.htm?r=top

[Kbeitz]

Check this one out...

https://www.facebook.com/916365331770192/videos/1331908216882566/

[4x4American]

Seen that one, you seen this one?:


https://youtu.be/9NRmYzLrvfM

[4x4American]

Here's a proper jacking:


https://youtu.be/PJt4md2J7KE


and here is one of my favorite falling videos:


https://youtu.be/V-SwpDKkHko




And here is my favorite falling video:
https://youtu.be/2x7MXn5zuEw

[Kbeitz]

That was some good ones for sure...

[4x4American]

https://www.youtube.com/watch?v=hDmNTBwo6fU&app=desktop

[Ox]

That Boltr guy sound exactly like a guy named Ave on the Utube.  Love Ave's vidyas.
Ol' Bud Merz would have hated me if I lived near him cause I woulda never left the place!

[4x4American]

Me too! I'm watching one right now:

https://www.youtube.com/watch?v=QhpOg186fks

Maybe he sounds like AvE because he is lol

I think that the powermodz guy forum member Ishobie (sp?) sounds like AvE.  He put a vidja up on his thread in the sawmill forum new guy with some land skidder sawmill... and he was talking over it I thought he was AvE

[4x4American]

I love the stuff AvE says..."give her a proper what for with a beefy thumb detector"  lol lol lol 

[paul case]

I guess I may live a sheltered life and all that but some of my favorite youtube vids are along these lines.

https://www.youtube.com/watch?v=MUuWWqRBpwc





PC

[Magicman]

Ouch, that is wild!  Where is Tammy Brokaw when we need her??   ???

[barbender]

PC, that's awesome! I could see myself getting into figure 8 school bus racing :D

[Kbeitz]

I think this is one of the best on utube.

https://www.youtube.com/watch?v=EiQTgT-Uq7U

[Dan_Shade]

https://youtu.be/QnTr9EJdpQ4

This guy has a great channel.

[paul case]

I very seldom read the comments on a video on youtube, but I caught 1 about the figure 8 racing.

''I think it should be against the rules to slow down at the intersection.''

I bet there isnt any texting and driving going on there!
PC

[sandhills]

PC we USED to have bus races at our county fair, not figure 8 but on our little 3/8 mile dirt track, I helped build one for my buddy.  I was scared, and we used to race stock cars there every week.  My farm fuel guy had one and got rolled, if he doesn't thank God every morning he wakes up that he was tied down to the cab and not the chassis he should because when they come apart they REALLY come apart.  We honestly thought he got torn in two, after two fairs (I think) they quit, my buddy sold it to some guy that turned it into a camper and everyone else turned them into RV's for hauling around wedding parties and such, a much safer use for them! It was fun building it but we got it there and there happened to be a guy in the pits with the tools and know how to get rid of the governor and turn the pump up on ours, that's when it got scary.

[Kbeitz]

The Art of Log Hive Making

https://www.youtube.com/watch?v=28R67u-4efs

[Ox]

What a neat way to make a hive!  Lots of work... work like this never used to bother me a bit but nowadays and the worse I get......nah.

[4x4American]

https://www.youtube.com/watch?v=8SZO9wnMPxU

[coxy]

they got nice equipment  wonder where all there safety gear was  ;D

[4x4American]

they got nice equipment  wonder where all there safety gear was  ;D

I don't think the Amish even know what osha is lol


These guys cheat though they have a fb page and use social media and smartphones ans all that lol I think the only thing they do amish is wear homemade clothes but other than that looks like just angood tax write off yup I'm gonna become Amish I can't compete with their lumber prices so if ya can't beat em join em lol

[JB Griffin]

https://m.youtube.com/watch?v=223aFkBccDs

There it is Baker two man sawmill setup.

[4x4American]

Yutt ok I've seen this and dreamed about it a couple two three times lol.  Clay Hedrick posted this he's a sales rep/other stuff guy at Baker.  Adam or Jeff told me that this vidjayo is taken place at Baker's production facility.  See Baker tests their equipment and uses it to make money also.  Gotta love it!

[4x4American]

https://www.youtube.com/watch?v=Ed-U4_Ayfww

[Peter Drouin]

See 4x4 all it takes is money to cut faster. :D :D :D :D :D

[joeziz]

https://www.youtube.com/watch?v=Ed-U4_Ayfww

Quality video, thanks for sharing

[Ruffneck]

https://youtu.be/JMll6TNnTs4

There may be a commercial... It's worth it, in my opinion.

Yippi Yi Yay! God Bless America!!!

[square1]

''I think it should be against the rules to slow down at the intersection.''

PC

I'm pretty sure that comment was from Mrs. Isham, my grade school bus driver.

[4x4American]

ok, this thing boogies.  Watch the whole thing through   


https://www.youtube.com/watch?v=2qVIX7J4-R8

[Don_Papenburg]

Thanks Ruffneck , Haven't heard that one in a long time

[barbender]

Dug, that thing does boogie! And just when I was thoroughly impressed, they threw in a few double cuts, just for the heck of it, it seems!

[Bert]

My current favorite- https://www.youtube.com/watch?v=1mMRLEr_7Qk

[Kbeitz]

https://www.youtube.com/watch?v=JHZkR6UVegY

[coxy]

cant watch any of them says i need permission  >:(

[Kbeitz]

https://www.youtube.com/watch?v=mSK-kaTAJn4

[paul case]

https://www.youtube.com/watch?v=-zfzT7QfLZc


PC

[Kbeitz]

I bet I watched this 50 times. One of the best videos ever posted...

https://www.youtube.com/watch?v=EiQTgT-Uq7U

[Raider Bill]

https://www.youtube.com/watch?v=4yo_od4JPzE

[Kbeitz]

[quote
[/quote]

People like that should not be allowed to drive...

[coxy]

looks like a typical NY snowflake to me  :D 8)

[Kbeitz]

I really like the chain log roller. I might need to make one for my mill...
You could do it without hydraulics...

https://www.youtube.com/watch?v=cePNAcRZU8s

[Kbeitz]

Hunting dogs part 4


https://www.youtube.com/watch?v=zqyaYYEFjaE

[btulloh]

That's good.  smiley_clapping. Watching good dogs work is my favorite part of hunting.

[4x4American]

That's good stuff there Kbeitz

[Kbeitz]

Another good one...

https://www.youtube.com/watch?v=ov1YncgXrfU

[ScottAR]

https://www.youtube.com/watch?v=R2n1FqAR7Wc

Neat stuff.  Shows a few gotchas on working with big live edge pieces.  Still worthwhile even if your not a cnc person.  Has many other projects without cnc but the channel does show different things you can do with one. 

[4x4American]

https://youtu.be/z8HhWVzzcVc

[chet]

https://www.youtube.com/watch?v=Li5j5mXIjy8

At the end you get a logs view. 

[4x4American]

That mebor company looks to have some of the most impressive new technology I've seen.  Hopefully they come to America with a dealer support network I think they'd do real well.

[moodnacreek]

Fort Ann: doesn't that new sawmill have heat?      And, did I see a guy turning a log with a WOOD handled cant hook !  Must have been a long time ago.

[dgdrls]

https://www.youtube.com/watch?v=gNjDs6kJ7jA

D

[dgdrls]

https://www.youtube.com/watch?v=zuRdUqHYq4o

Lucas mill cutting Red Gum 

D

[4x4American]

https://youtu.be/COGhNecFTPo

[moodnacreek]

Spiral posts ?  Can't do that on a circle mill.

[51cub]

This is one of the favorites. At least it's the only channel that I've seen every one of his videos.    https://youtu.be/9WXHNBMLZZM

[Kbeitz]

So I guess I'm not the only one making Spiral posts now....



 

[Southside]

Kbeitz,

That's really interesting, can you share more of that with us?  I did not get what the other guy was doing at first until about the second or third cut.  Do you sell a lot of those?  Thanks

[Kbeitz]

Kbeitz,

That's really interesting, can you share more of that with us?  I did not get what the other guy was doing at first until about the second or third cut.  Do you sell a lot of those?  Thanks

Starts on this page of my saw mill build.

https://forestryforum.com/board/index.php/topic,82853.640.html

[Kbeitz]

This video doesn't have much to do with sawing trees but I can't
stop watching it. I bet I watched it 50 times in the last few days.

https://www.youtube.com/watch?v=qN3FIPzSfko&index=1&list=PLPmdHS4aWQkarJdxyJX_pwpR0Rtv7vGV_

[Magicman]

??  I guess that I missed something somewhere?   ???

[4x4American]

This video doesn't have much to do with sawing trees but I can't
stop watching it. I bet I watched it 50 times in the last few days.

https://www.youtube.com/watch?v=qN3FIPzSfko&index=1&list=PLPmdHS4aWQkarJdxyJX_pwpR0Rtv7vGV_

I seen that on facebook a week or so back and propbably watched it 3-4x...yah that girl is good.   






One of my favorite Hank songs:

https://www.youtube.com/watch?v=s5ywIVBBt-Y


(okay almost all of his songs are my favorites lol)

[Woodcutter_Mo]

So I guess I'm not the only one making Spiral posts now....



 

I've made a couple, but I'll admit they weren't on purpose... ;D

[51cub]

 Some of you might have seen this one, but I enjoyed it. I learned a little about clapboards, too. If there's a bad part to this video, it's that now I have to work harder to get up there to visit-Edit, he only thing missing from this video is a stationary engine and a blacksmith!
https://youtu.be/Y6zK8fi9Hwc

[Skeans1]

Here's another good faller
https://youtu.be/Y8bA-Iyef4w
https://youtu.be/6t4srVI9PLY
https://youtu.be/HdgMcbNwZ3o
https://youtu.be/WW0phMqGeUU
Then you can't forget about Jack either

[4x4American]

Baker's latest video:


Two Man Sawmill System in Action!!! FULL VIDEO "C Highway location" - YouTube

[4x4American]

01 C Frick Sawmill - YouTube

[Peter Drouin]

2 Man setup is nice 4x4.

[JB Griffin]

Baker's latest video:


Two Man Sawmill System in Action!!! FULL VIDEO "C Highway location" - YouTube

My boss went and seen it run, they told him there cuttin 6mbf a day with two guys, pretty dam impressive. 

[SwampDonkey]

A hermit and his axes. ;)

The Long Pull - YouTube


Cooking some handles - YouTube


A handful of axes - YouTube


Norlund Tomahawk Axe - YouTube


Klein 5509 Axe Guard - YouTube

[osage outlaw]

You guys might have already seen this video.  As an ax collector I really enjoy it.


https://www.youtube.com/watch?v=Qr4VTCwEfko

[SwampDonkey]

Making a broad axe handle from a downed ash (beavers).


Broad Axe handle - YouTube

[4x4American]

https://youtu.be/Xv0-YS2McH4

[Peter Drouin]

I see a few problems with it, Maybe they will work them out, Wonder why they did not use the debarker on that log.

[4x4American]

The hydraulics are too slow thats for sure my 70super would smoke that thing when it comes to log handling but looks like it can feed pretty good.  

[4x4American]

Here's the video I was telling you about Pete

3000 bdft / 8 hr shift wood mizer LT40 G25HD - YouTube

[Peter Drouin]

Thanks, Dug, I see the kicker on the outfeed side of the edger. But I think a pan will work better, I like the green chain and kicker for the slabs. 
Overall a nice up, Kinda what I'm trying to do. 
A green chain will hold a lot of lumber. I think I can fit a 16' to 20' one.
Today I will be setting up on the other side of my 30'x40' shed. 
Talk to you later. 

[ChugiakTinkerer]

I need to get me a pair of new snowshoes.  That, or make them...

Alaska Native Snow Shoe make frame - YouTube

[RjMaan]

Thanks for sharing. These videos are really amazing.

[4x4American]

Baker Products tour video - YouTube

[4x4American]

I posted this in a day cutting wood but gonna post it here as well for the records this is me and my 70 cutting soft maple

Wood-Mizer LT70 Super Cutting 5/4 WSM - YouTube

[4x4American]

https://youtu.be/ChOW01Vh96s

[quilbilly]

1956 Kenworth LW523 log truck First load in 18 years!!! - YouTube

This is my friend Daniel Boone. He's got a good bit of logging video on YouTube. The Eco harder bit is probably my favorite.

[Runningalucas]

1956 Kenworth LW523 log truck First load in 18 years!!! - YouTube

This is my friend Daniel Boone. He's got a good bit of logging video on YouTube. The Eco harder bit is probably my favorite.

that's a cool rig; seeing it in action, well sitting action, sure is neat!

[SwampDonkey]

Functioning 1830's water powered saw mill at Kings Landing in Prince William, N.B.

NB's Kings Landing Sawmill running for first time since 2012 - YouTube

[loganworks2]

I visited Kings Landing over 40 years ago. It was truly a fantastic experience.  I spent a good part of the day at the mill taking with the Sawyer and Miller. As a result he gave me a personal tour through the entire building.  The experience was one I still remember and was the start of a long journey that I hope to complete in the near future and become a sawyer myself. 

[4x4American]

Romportl Circular Sawmill demo Spooner Wi - YouTube

[Skeans1]

This is a real cool Mill here in Oregon https://youtu.be/idDUEYIyijQ

[4x4American]

Here's a video of building a bridge.  I cut the black locust timbers you see them unloading at the 43min mark from the yellow penske truck.

At 53 minutes in you can see the blue spraypaint on the end of a white oak timber thats how I mark my logs.  I had run out of black locust log and I had one 16' beautiful white oak log that ended up making just enough to finish the order.


https://youtu.be/ZtFl5iJ7eVk

[btulloh]

Owning a chainsaw doesn't make you an arborist

TREE CUTTING FAILS. EPIC COMPILATION - YouTube

[4x4American]

Band Mill, Carriage, Gang/Edger - YouTube

[red]

Just bringing this back up . . there are some good videos posted here