The Forestry Forum
General Forestry => Sawmills and Milling => Topic started by: SeanG on May 01, 2019, 10:28:58 PM
Hello everyone I was looking for the drive belt setting for my woodmizer lt10 I changed the motor from a 7hp Kohler to a 13hp predator motor and was wondering if that would affect what the setting may be for it, if not then I would be looking for what the setting is.
Thanks for your time guys and gals
Sean
Welcome to the Forestry Forum, SeanG!
Hello Chuck
Sean, might want to go to the front page and scroll all the way to the bottom and talk to the Wood-Mizer folks!
Hello Sean,the manual says 19/64 with 6 lbs pull for a new belt 4 lbs for a used belt.Hope this helps,mine is a 2010.
Thanks bigtim