iDRY Vacuum Kilns

Sponsors:

Sawmill Maintenance/Repairs

Started by Magicman, February 23, 2023, 04:25:03 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 ... 24 25
User actions

WV Sawmiller

#600
September 05, 2024, 09:48:48 AM
   I may have to try that little angled fitting. Mine screws into the standard 3/4"hose bibb on the jug and does want to kink the hose a bit. That plus I lost the little air vent cap years ago so I have a whittled off peg in there so the air does not flow as well. I used it on some hickory Tuesday and it did not drip well. When I came home I put the hose to it and blew the line out so it should at least be clearer now. 

   I don't use mine much when sawing tulip poplar or such. I use it for pine, spruce, hemlock, hickory and oak.
Howard Green
WM LT35HDG25(2015) , 2011 4WD F150 Ford Lariat PU, Kawasaki 650 ATV, Stihl 440 Chainsaw, homemade logging arch (w/custom built rear log dolly), JD 750 w/4' wide Bushhog brand FEL

Dad always said "You can shear a sheep a bunch of times but you can only skin him once

Magicman

#601
September 05, 2024, 01:34:18 PM
That 90° fitting is an RV accessory.  I use the quick connect fittings to eliminate screwing and also they swivel.  :thumbsup:
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman
Print
Go Up Pages 1 ... 24 25
User actions

Thank You Sponsors!