iDRY Vacuum Kilns

Sponsors:

homemade lube system

Started by panman, March 09, 2010, 07:05:27 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2 All
User actions

Magicman

#25
March 17, 2010, 09:46:53 AM
Papa,  I would need a looooooong hose to use your method.... :D
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

Papa1stuff

#26
March 17, 2010, 09:55:32 AM
Guess you could hook up to your customers hose ;D ;D
1987 PB Grader with forks added to bucket
2--2008 455 Rancher Husky
WM CBN Sharpener & Setter

panman

#27
March 17, 2010, 10:04:31 AM
Are you guys running your lube system on the idle side, or the drive side?
I was thinking of running mine on the drive side.
Jim

robnrob2

#28
March 17, 2010, 11:58:17 AM
My Lube is on the Idle side, and I have a wick like system, sept I use a 1" disposable chip brush,, handle cut off, drilled just above the metal band on the brush, and its bolted on just behind the drip line,, I use a deasel mix,, the brush just sorta wipes the band, just this side of the guide bearings,, only need to crack the lube to it once in a while,, maybe every 3-4 boards in pine,, much less in other woods..
Print
Go Up Pages 1 2 All
User actions

Thank You Sponsors!