iDRY Vacuum Kilns

Sponsors:

Diagonal cut

Started by dutchman, October 22, 2003, 05:54:11 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

dutchman

Cut 4"x8"x8'  cant on the diagonal for a local pallet shop.They need them to hold steel coils in place.
Made a jig out of 2"x8"x8'  add wedges (screwed  on)  cut to the right angle,add a stop on the far end(screws) ,and clamp it on the mill.
Tested with a 4"x4"x 8' cut fine.
I was afraid the cant would walk up the wedge, no problem.
With one helper we cut 25 / 50 min.
Blade broke,weather moved in,started to get dark, shut down.

 :)

Kevin_H.

Value adding at it's best...

good luck dutchman
Got my WM lt40g24, Setworks and debarker in oct. '97, been sawing part time ever since, Moving logs with a bobcat.

Thank You Sponsors!