Author Topic: My timber frame build pics. (Read 2020 times)

Tim_W · « **on:** January 10, 2020, 02:53:17 PM »

Just wanted to share a few photos of my timber frame build. Took 18 months, but was a blast. 16 X 20 frame, 12' to the top of the plates. 8 x 8 posts, 8 x 10 tie beams, 5 x 6 rafters. Top plates twisted, that was a challenge. All Ponderosa Pine.

Jim_Rogers · « **Reply #1 on:** January 10, 2020, 03:02:43 PM »

Thanks for sharing. I've watched all your videos.
They were nice.

Jim Rogers

Dave Shepard · « **Reply #2 on:** January 10, 2020, 08:57:07 PM »

I've watched all of your videos, also. Looks great.

trimguy · « **Reply #3 on:** January 10, 2020, 09:17:42 PM »

Looks great. How do I look up the videos that you speak of ?

Biocmp · « **Reply #4 on:** January 10, 2020, 09:47:27 PM »

I would also like to see a link to the videos, the frame looks great.

Dave Shepard · « **Reply #5 on:** January 10, 2020, 11:30:46 PM »

Great Plains Craftsman on YouTube.

Jim_Rogers · « **Reply #6 on:** January 11, 2020, 09:43:11 AM »

Quote from: Dave Shepard on January 10, 2020, 11:30:46 PM

Great Plains Craftsman on YouTube.

Great Plains Craftsman - YouTube

Tim_W · « **Reply #7 on:** January 13, 2020, 10:15:14 AM »

Thank you Jim and Dave. I have used knowledge from both of you on this forum in that build, Jim's helpful posts on timber framing, and I used your dimensions Dave for my frame as well. Restoring the Millers Falls was the first step, thank you Jim with help sourcing a few parts and tips on that machine as well.

The videos show all the challenges, and how I worked though them. It took me a long time to build it in my spare time, so the timbers sat a while through the summer months. Ponderosa has strength, but is a bit unstable so I had to learn how to cut the joints in twisted timbers. I was not as difficult as it first seemed, so to those concerned about that, it is doable. You just have to get over the frame looking perfect, because that probably never happens. There are a few things I would do differently, but the experience made me a better builder for sure. Can't wait to do another one!

Stephen1 · « **Reply #8 on:** January 13, 2020, 09:58:56 PM »

Great job! Looks great

Brad_bb · « **Reply #9 on:** January 14, 2020, 12:46:22 AM »

I'm going to check out the vids. Tim, you can put your location in your profile and it will show up in your posts so we then know what area/state etc you are in.

Looks good. what's it going to be for?

thecfarm · « **Reply #10 on:** January 14, 2020, 05:54:33 AM »

I like it.
Just a wondering, why the 2 different type siding?

doc henderson · « **Reply #11 on:** January 14, 2020, 06:10:42 AM »

looks great. I guess if it rains and you get splashing, it will be on the corrugated metal and not the B&B.

hedgerow · « **Reply #12 on:** January 14, 2020, 11:10:07 AM »

Tim Nice job. If you run out of things to do you could come to Nebraska and build one for me for a hide out cabin on one of my farms.

123maxbars · « **Reply #13 on:** January 14, 2020, 08:37:53 PM »

Nice Work Tim,

Greyman · « **Reply #14 on:** January 16, 2020, 05:14:06 PM »

Quote from: thecfarm on January 14, 2020, 05:54:33 AM

I like it.
Just a wondering, where the 2 different type siding?

For the snow I'm guessing.

Tim_W · « **Reply #15 on:** January 17, 2020, 02:23:09 PM »

Quote from: thecfarm on January 14, 2020, 05:54:33 AM

I like it.
Just a wondering, why the 2 different type siding?

For fire. We have a lot of wildland fires here, and the steel will help protect the building from that. I also like the looks of it.

Tim_W · « **Reply #16 on:** January 17, 2020, 02:25:35 PM »

Quote from: Brad_bb on January 14, 2020, 12:46:22 AM

I'm going to check out the vids. Tim, you can put your location in your profile and it will show up in your posts so we then know what area/state etc you are in.

Looks good. what's it going to be for?

Will do Brad. I think I am going to set up my smithy in there. Will be a great workshop. The loft will be for storage. Thanks!

thecfarm · « **Reply #17 on:** January 19, 2020, 08:49:01 AM »

Was just a wondering, thank you. Good idea.
I was thinking, maybe you only had short trees.

TimFromNB · « **Reply #18 on:** February 02, 2020, 07:00:13 PM »

Hi Tim,

Nice work! I've watched many of your videos. The twisted timbers video helped me figure things out for my timbers. Thanks for sharing.

BCsaw · « **Reply #19 on:** February 09, 2020, 05:21:10 PM »

Great job!!!

Really like the look

Forestry ForumSponsored by:

Author Topic: My timber frame build pics. (Read 2020 times)

Forestry Forum
Sponsored by: