iDRY Vacuum Kilns

Sponsors:

Leveling hm130 max woodland mills on trailer

Started by New mill owner, June 16, 2022, 06:03:41 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

New mill owner

June 16, 2022, 06:03:41 PM
Having some challenges leveling mill says it's level with 6 foot square but centre has a hump in it

bags

#1
June 16, 2022, 07:35:39 PM
Run a tight string line from one end to the other and set it to the line.

New mill owner

#2
June 16, 2022, 08:36:28 PM
Ended up doing that, do you leave the tires on ground, thanks

RAYAR

#3
June 17, 2022, 03:37:41 AM
If you can level it up with tires on the ground, that's fine, that much more support, as long as the carriage / band wheel covers clears them.
mobile manual mill (custom build) (mods & additions on-going)
Custom built auto band sharpener (currently under mods)
Husqvarna 50, 61, 254XP (and others)
96 Polaris Sportsman 500
2006 Ranger 4X2 w/cap, manual trans (431,000 Km)
Print
Go Up Pages1
User actions

Thank You Sponsors!