iDRY Vacuum Kilns

Sponsors:

Drying Burr Oak slabs

Started by D6c, June 11, 2018, 09:28:18 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

D6c

I've got several 3" thick burr oak slabs that were cut a week ago and I've got them stacked on a pallet, stickered, and covered with pole building siding.  I doubled up the stickers so there is an 1 1/2" gap.
It's in shade the first half of the day and on the west where it gets sun I hung burlap to limit the sun.

Are these going to be ok or is there something else I should be doing?  Burr oak seems to be prone to warping and checking.

GeneWengert-WoodDoc

To control checking, we need very slow drying. So, burlap all around the pile may be needed   No rain on the wood. Sticker at 3/4" as greater means faster drying. There is a risk of mold with 12/4, but that is inevitable with thick white oak in air drying
Gene - Author of articles in Sawmill & Woodlot and books: Drying Hardwood Lumber; VA Tech Solar Kiln; Sawing Edging & Trimming Hardwood Lumber. And more

Thank You Sponsors!