Vote with common sense
The 20+ gallon diesel fuel tank on Tom started leaking a few months back. The tank was fine for 17 years, but then the fuel drain plug started leaking.
Shortly thereafter the energy chain that housed the hydraulic, fuel and electrical lines grenaded on me, and it took several weeks for the manufacturer...
Shortly thereafter the energy chain that housed the hydraulic, fuel and electrical lines grenaded on me, and it took several weeks for the manufacturer...
Hello. I need to pull a Timberjack(JD) skidder apart at articulating joint. Everything is free but my backhoe won't pull it apart. I have driveshaft out.
Do the axle shafts have to be removed also?
Do the axle shafts have to be removed also?
Sorry it's going to be long
looky looker since 2020. member shorter
First about me, born 1954, retired production welder 30 yr service @ age 50. worked in carpentry and or drove big rigs when laid off and after retired from IH. Back around 2006 moved to south IL. to hunt big buck deer only got meat. At...
Hi everyone been awhile being on here. Lots of knowledge on here so figure I would pick your brains.
Got a 04 fabtek that we have been running for a few years now and just having some small problems that we are working through but it has been good so far....till a few weeks ago.
So working some plantation pine and the hyd function would just die. No joysticks or foot controls. Iqan screen would be locked up, engine still running. You shut it of and restart it and it will be fine for the rest of the day. That happen for 2 weeks off and on then 1 day it went off and wouldn't reset. Would thought the iqan computer was bad (black box) after doing some checks and calling a few people. Soon we replaced the iqan with a used one and BOOM! it worked for about 4 days then the samething started happening again. It eventually just froze up again and all the screen says is "parker" . Anyone have any insight on this problem or have it before?Read More
Got a 04 fabtek that we have been running for a few years now and just having some small problems that we are working through but it has been good so far....till a few weeks ago.
So working some plantation pine and the hyd function would just die. No joysticks or foot controls. Iqan screen would be locked up, engine still running. You shut it of and restart it and it will be fine for the rest of the day. That happen for 2 weeks off and on then 1 day it went off and wouldn't reset. Would thought the iqan computer was bad (black box) after doing some checks and calling a few people. Soon we replaced the iqan with a used one and BOOM! it worked for about 4 days then the samething started happening again. It eventually just froze up again and all the screen says is "parker" . Anyone have any insight on this problem or have it before?
Posted in Forestry and Logging
October 23, 2024, 10:46:25 AM
Written by RockingMWoodworks
Views: 1705
Hi group I am new here. I have a bunch of red and white oak trees I need to get from Purchase NY to Stroudsburg PA. There are some big logs probably 4 about 11' by 40" and about 7000lbs and couple 10' by 30" around 5000lbs. Any suggestions of people who could help would be greatly appreciated.