iDRY Vacuum Kilns

Sponsors:

Nice Ash?

Started by weimedog, November 22, 2021, 11:24:10 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

weimedog

November 22, 2021, 11:24:10 PM
Clip from todays adventures.

My day, then repeat - YouTube
Husqvarna 365sp/372xpw Blend, Jonsered 2171 51.4mm XPW build,562xp HTSS, 560 HTSS, 272XP, 61/272XP, 555, 257, 242, 238, Homelite S-XL 925, XP-1020A, Super XL (Dad's saw); Jonsered 2094, Three 920's, CS-2172, Solo 603; 3 Huztl MS660's (2 54mm and 1 56mm)

SwampDonkey

#1
November 23, 2021, 03:24:49 AM
Great show! Do you do any milling? Seems like some nice lumber to be had in that but log. I sure to likes my ash. ;D
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

sawguy21

#2
November 23, 2021, 03:40:46 AM
Be careful how you say that! ;D
old age and treachery will always overcome youth and enthusiasm

weimedog

#3
November 23, 2021, 07:34:27 AM
Husqvarna 365sp/372xpw Blend, Jonsered 2171 51.4mm XPW build,562xp HTSS, 560 HTSS, 272XP, 61/272XP, 555, 257, 242, 238, Homelite S-XL 925, XP-1020A, Super XL (Dad's saw); Jonsered 2094, Three 920's, CS-2172, Solo 603; 3 Huztl MS660's (2 54mm and 1 56mm)

Twowithone

#4
November 23, 2021, 10:35:29 AM
Awesome video

weimedog

#5
November 25, 2021, 12:02:17 PM
Husqvarna 365sp/372xpw Blend, Jonsered 2171 51.4mm XPW build,562xp HTSS, 560 HTSS, 272XP, 61/272XP, 555, 257, 242, 238, Homelite S-XL 925, XP-1020A, Super XL (Dad's saw); Jonsered 2094, Three 920's, CS-2172, Solo 603; 3 Huztl MS660's (2 54mm and 1 56mm)

Al_Smith

#6
November 26, 2021, 08:20:17 AM
A lot can be said for those ash which if they recover it will be two generations from now if even then .Fact I was taking a walk about a few days ago  and noticed I have a 100 foot windfall I've been watching for at least ten years .Fiddled around too long and mother nature dropped it for me .Lots of firewood and likely some decent lumber logs .It will take me a couple of days of hard work to recover it .Might get it this winter or might not but it isn't going any where if I don't .Ohio weather is so unpredictable you never know exactly what you might wake up to .Could go from mild to a blizzard in two days .I'm retired and don't have any time  line I have to follow so whatever it is,is . ;)

weimedog

#7
December 01, 2021, 05:48:08 PM
Husqvarna 365sp/372xpw Blend, Jonsered 2171 51.4mm XPW build,562xp HTSS, 560 HTSS, 272XP, 61/272XP, 555, 257, 242, 238, Homelite S-XL 925, XP-1020A, Super XL (Dad's saw); Jonsered 2094, Three 920's, CS-2172, Solo 603; 3 Huztl MS660's (2 54mm and 1 56mm)

Woodfarmer

#8
December 02, 2021, 11:00:27 AM
Is the winch solely hydraulic or does pto run the hydraulic pump.
Thinking about replacing my old Farmi 501

HemlockKing

#9
December 02, 2021, 12:22:53 PM
Quote from: sawguy21 on November 23, 2021, 03:40:46 AM
Be careful how you say that! ;D
Who gives a rats ash!!!!  ;D
A1

weimedog

#10
December 02, 2021, 01:46:44 PM
Husqvarna 365sp/372xpw Blend, Jonsered 2171 51.4mm XPW build,562xp HTSS, 560 HTSS, 272XP, 61/272XP, 555, 257, 242, 238, Homelite S-XL 925, XP-1020A, Super XL (Dad's saw); Jonsered 2094, Three 920's, CS-2172, Solo 603; 3 Huztl MS660's (2 54mm and 1 56mm)

weimedog

#11
December 03, 2021, 03:30:08 AM
Husqvarna 365sp/372xpw Blend, Jonsered 2171 51.4mm XPW build,562xp HTSS, 560 HTSS, 272XP, 61/272XP, 555, 257, 242, 238, Homelite S-XL 925, XP-1020A, Super XL (Dad's saw); Jonsered 2094, Three 920's, CS-2172, Solo 603; 3 Huztl MS660's (2 54mm and 1 56mm)

weimedog

#12
December 11, 2021, 08:44:50 AM
Husqvarna 365sp/372xpw Blend, Jonsered 2171 51.4mm XPW build,562xp HTSS, 560 HTSS, 272XP, 61/272XP, 555, 257, 242, 238, Homelite S-XL 925, XP-1020A, Super XL (Dad's saw); Jonsered 2094, Three 920's, CS-2172, Solo 603; 3 Huztl MS660's (2 54mm and 1 56mm)
Print
Go Up Pages1
User actions

Thank You Sponsors!