The Forestry Forum is sponsored in part by:
0 Members and 1 Guest are viewing this topic.
LD have you looked in your owners manual to see what the Gross Combination Weight Rating is? It varies a lot by truck, even the same brand with different builds. In my experience this was the limiting factor.
Quote from: T Red on June 20, 2010, 09:57:07 AMLD have you looked in your owners manual to see what the Gross Combination Weight Rating is? It varies a lot by truck, even the same brand with different builds. In my experience this was the limiting factor. Chances are you will not like what you find and I don't know of any laws that limit you to that number. For the most part, the GCVWR is used by the manufacturers to limit their liability. And then at the same time they advertise those pickups pulling some huge loads and then tell you not to try this with your vehicle. You know the drill.
Chances are you will not like what you find and I don't know of any laws that limit you to that number. For the most part, the GCVWR is used by the manufacturers to limit their liability.
Second would be axle loads, not necessarily ratings. And third would be total combined load, not necessarily ratings.
Also you can be ticketed for both overweight on an axle
I don't follow you here. What are you considering the difference in axle load and ratings. Are you saying you can be over the axle rating and be legal? Where's the limit if you go by the combined load and disregard the truck rating?
Started by RKONeilJr on Forestry and Logging
Started by Old Greenhorn on Forestry and Logging
Started by RayMO on Forestry and Logging
Started by OH logger on Forestry and Logging