iDRY Vacuum Kilns

error 797 PCI simple command controller

Started by Tom, September 14, 2009, 08:49:17 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Tom

DanG has a problem.

He was creating a post for the forum and a message came up that said "Found new Hardware".

Then his computer hung up.  Nothing worked.  He couldn't get the task manager, do a alt/cntl delet or anything.   

He unplugged his computer.

when he turned it back on, he got this error message and can no longer make an internet connection. (he is dial-up)  Error 797   PCI simple command controller
It seems to be telling him that it can't find his modem.

Anybody have any ideas?

Jeff

Modem problems. See if he has a disk to reinstall his modem incase ita a driver problem. It could be the modem went to hell too.
Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

pineywoods

Agree with Jeff, probably the modem. It may be a plug in card, just yank it out and plug in another one. One of the most common failures is lightening coming in on the phone line and taking out the modem. Don't have to be a direct hit, a near miss 5 miles down the line will usually take out the modem..This is assuming DanG has a desktop, if it's a laptop, all bets are off.
1995 Wood Mizer LT 40, Liquid cooled kawasaki,homebuilt hydraulics. Homebuilt solar dry kiln.  Woodmaster 718 planner, Kubota M4700 with homemade forks and winch, stihl  028, 029, Ms390
100k bd ft club.Charter member of The Grumpy old Men