iDRY Vacuum Kilns

Sponsors:

Full log rafter spacing.

Started by Ladysmith, March 27, 2016, 10:20:02 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Ladysmith

Hello all, I am new to forestryforum so please bear with me. I have a cabin ( black spruce)in the far north and the area gets a lot of snow. I want to replace the 4 pitch roof with a 10/12, insulate it and have room for a loft. The cabin is 14x20.
My plan is to use 8 inch log rafters, then deck with
2x6 TNG, put 4 inch r-tech on top then 5/8 OSB, then shingle. My question is, can I space some of the rafters at 6 feet on center but mostly at 4 feet. thanks.
Rich

Magicman

Hello Ladysmith, and Welcome to the Forestry Forum.  Adding your location to your profile always helps with questions.   ;)
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

DDW_OR

I do not know the rafter spacing needed.
shingles? why not a metal roof. snow slides off, and less danger from a wildfire ember landing on the roof and catching it on fire. and i think cheaper insurance?

here are some rafter calculating sites i used for my barn

http://www.awc.org/codes-standards/calculators-software/spancalc
http://www.blocklayer.com/Roof/RafterEng.aspx
http://www.blocklayer.com/Roof/RoofEng.aspx
http://www.hsh.k12.nf.ca/technology/cmhc/english/book/appendix/table26/index.htm
"let the machines do the work"

Ladysmith

Thanks for the response and recommendation of metal roof. M CH appreciated.
Rich

pabst79

I can't help on spacing as I would just be guessing, but I 2nd the idea of a metal roof. Less chance of fire and it will last a lifetime. Shingles made today regardless of "lifetime" warranty are a pain in the rear. What part of Ontario is your cabin in?
Not sure which came first, but I have chickens and eggs.

Ladysmith

Thanks for the metal recommendation. I will be using it. I am 148 miles north of International Falls/ Fort Frances. Closest town is Dryden, Ontario.
Rich

Heartwood

"Log Span Tables" book for sizing round joists, beams and rafters is available from the International Log Builder's Assn. http://www.logassociation.org/resources/publications.php.
You would need to know the snow load, which I suspect is pretty high up there, and the species of wood for the rafters.

Ladysmith

Heartwood,
Thanks for the link. I am using black spruce 8" with a 55# snow load so hopefully I can match to the tables you reference.  Rich.
Rich

pabst79

When I was a kid we used to stay in Dryden on the way to Pickle lake, now the roads are better going up the North shore, so we go through Ignace. Its unbelievable fishing no matter were you go. Good Luck with the cabin!

Josh
Not sure which came first, but I have chickens and eggs.

Thank You Sponsors!