iDRY Vacuum Kilns

Sponsors:

EZ Boardwalk JR owners

Started by Downstream, March 17, 2018, 09:22:08 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Downstream

March 17, 2018, 09:22:08 PM
Just wondering what other JR owners have settled on as their favorite blade to use with 13hp honda?  I have been using the timberwolf 10 degree from the beginning with pretty good luck, but was wondering if there was something that cuts better or a little smoother.  I need to buy some new blades soon so looking for recommendations.
EZ Boardwalk Jr,  Split Second Kinetic logsplitter, Granberg Alaskan Chainsaw Mill, Stihl 660 and 211, Logrite 60" cant hook, Dixie 32 Tongs

paul case

#1
March 17, 2018, 09:39:07 PM
What is the length of the blade on the jr.?
life is too short to be too serious. (some idiot)
2013 LT40SHE25 and Riehl edger,  WM 94 LT40 hd E15. Cut my sawing ''teeth'' on an EZ Boardwalk
sawing oak.hickory,ERC,walnut and almost anything else that shows up.
Don't get phylosophical with me. you will loose me for sure.
pc

Downstream

#2
March 18, 2018, 07:13:24 AM
Length is 155".
EZ Boardwalk Jr,  Split Second Kinetic logsplitter, Granberg Alaskan Chainsaw Mill, Stihl 660 and 211, Logrite 60" cant hook, Dixie 32 Tongs

Bruno of NH

#3
March 18, 2018, 08:39:49 AM
I'm upgrading to more hp this spring
But have run the same 13 hp  as you for 4 years
7° and 4° bands work the best for me with the 13 hp
Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

Kbeitz

#4
March 18, 2018, 09:08:23 AM
13hp Honda for me and 4° bands work the best for me.
Collector and builder of many things.
Love machine shop work
and Wood work shop work
And now a saw mill work
Print
Go Up Pages1
User actions

Thank You Sponsors!