iDRY Vacuum Kilns

Sponsors:

Pecan

Started by Sixacresand, November 29, 2012, 11:03:40 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Okrafarmer

That's a serious whack of pecannery, there, WDH!
He that dwelleth in the secret place of the most High shall abide under the shadow of the Almighty. Psalm 91:1

Operating a 2020 Woodmizer LT35 hydraulic for Upcountry Sawmill, Dacusville, SC

Now selling Logrite tools!

Writing fiction and nonfiction! Check my website.

thecfarm

If those was limbs,can you imagine how big the tree would of been????
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

customsawyer

If memory serves one of those logs had Danny and I talking to ourselves trying to get it loaded. Sixacresand give it a shot. The worst thing that can happen is you end up with some smooth cut firewood but you might end up with something great.
Two LT70s, Nyle L200 kiln, 4 head Pinheiro planer, 30" double surface Cantek planer, Lucas dedicated slabber, Slabmizer, and enough rolling stock and chainsaws to keep it all running.
www.thecustomsawyer.com

Sixacresand

Jake, Danny,  Those logs make my load look like chop sticks.
"Sometimes you can make more hay with less equipment if you just use your head."  Tom, Forestry Forum.  Tenth year with a LT40 Woodmizer,

WDH

This is the one that vexed us  :).



 

Jake,

You need a bigger truck or smaller logs  ;D.
Woodmizer LT40HDD35, John Deere 2155, Kubota M5-111, Kubota L2501, Nyle L53 Dehumidification Kiln, and a passion for all things with leafs, twigs, and bark.  hamsleyhardwood.com

Magicman

I wouldna couldna touched that.   :o
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

customsawyer

Maybe I need to stop letting friends talk me into things that over load my wagon. ;D
Never mind, where is the fun in that.
Two LT70s, Nyle L200 kiln, 4 head Pinheiro planer, 30" double surface Cantek planer, Lucas dedicated slabber, Slabmizer, and enough rolling stock and chainsaws to keep it all running.
www.thecustomsawyer.com

WDH

Quote from: customsawyer on December 01, 2012, 08:31:59 PM
Maybe I need to stop letting friends talk me into things that over load my wagon.

You are just too easy  :D.
Woodmizer LT40HDD35, John Deere 2155, Kubota M5-111, Kubota L2501, Nyle L53 Dehumidification Kiln, and a passion for all things with leafs, twigs, and bark.  hamsleyhardwood.com

POSTON WIDEHEAD

That log would make Magic come out of his seat!  :D :D :D
The older I get I wish my body could Re-Gen.

WDH

He would have to sit on the top of the top of the seat  ;D.
Woodmizer LT40HDD35, John Deere 2155, Kubota M5-111, Kubota L2501, Nyle L53 Dehumidification Kiln, and a passion for all things with leafs, twigs, and bark.  hamsleyhardwood.com

Magicman

That exceeds the limits of the Magic seat.   ;D
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

WDH

Yep, you need a long bar on your chainsaw.  I won't post a picture of that so as to not scare the children  :).
Woodmizer LT40HDD35, John Deere 2155, Kubota M5-111, Kubota L2501, Nyle L53 Dehumidification Kiln, and a passion for all things with leafs, twigs, and bark.  hamsleyhardwood.com

learner

Ok now i have to ask. What's the big deal with pecan?  Does it chew up blades?  Is it next to impossable to dry?  I LOVE a good challenge so have to ask.
WoodMizer LT40 Super Hydraulic, MF-300 FEL, Nissan Enduro 60 forklift, 2 Monkey Wards Power Kraft Radial arm saws, Rockwell series 22-200 planer, Prentiss 210 loader

customsawyer

Learner in answer to your question. Yes all of the above.
Two LT70s, Nyle L200 kiln, 4 head Pinheiro planer, 30" double surface Cantek planer, Lucas dedicated slabber, Slabmizer, and enough rolling stock and chainsaws to keep it all running.
www.thecustomsawyer.com

Okrafarmer

Quote from: WDH on December 01, 2012, 08:20:44 PM
This is the one that vexed us  :).

Jake,

You need a bigger truck or smaller logs  ;D.

Bigger sawmill?  :-X :-X :-X :-X :-X :-X :-X
smiley_horserider smiley_horserider smiley_horserider smiley_horserider smiley_horserider
He that dwelleth in the secret place of the most High shall abide under the shadow of the Almighty. Psalm 91:1

Operating a 2020 Woodmizer LT35 hydraulic for Upcountry Sawmill, Dacusville, SC

Now selling Logrite tools!

Writing fiction and nonfiction! Check my website.

Red Clay Hound

Quote from: customsawyer on December 01, 2012, 08:31:59 PM
Maybe I need to stop letting friends talk me into things that over load my wagon. ;D
It's ok Jake.  I think I paid him back.  I gave him a red oak log a couple months ago that overloaded his wagon.  His tractor wouldn't pick it up and he said it took him over an hour just to get it on his LT15.  His pride ego wouldn't let him admit it was too big! ;D ;D ;D
2007 Wood-Mizer LT40 Super Hydraulic with 51 hp. Cat; 2007 Wood-Mizer EG200 Twin Blade Edger; Woodmaster 718 Molder/Planer; Stihl MS460 and MS362 Chainsaws; 2011 John Deere 5065 with JD 553 Loader

Nomad

Quote from: WDH on December 01, 2012, 08:20:44 PM
This is the one that vexed us  :).



 

Jake,

You need a bigger truck or smaller logs  ;D.

     Now cut that out!!  Ya made my LT50 backfire, but yer makin my Lucas drool. ;D
Buying a hammer doesn't make you a carpenter
WoodMizer LT50HDD51-WR
Lucas DSM23-19

Okrafarmer

Jake needs a swingmill!  :-X
(to go with the LT-70, not to replace it!)
He that dwelleth in the secret place of the most High shall abide under the shadow of the Almighty. Psalm 91:1

Operating a 2020 Woodmizer LT35 hydraulic for Upcountry Sawmill, Dacusville, SC

Now selling Logrite tools!

Writing fiction and nonfiction! Check my website.

customsawyer

I would love to have a swing mill but between having a friend with one and also having a good chainsaw I just don't see the need.
Two LT70s, Nyle L200 kiln, 4 head Pinheiro planer, 30" double surface Cantek planer, Lucas dedicated slabber, Slabmizer, and enough rolling stock and chainsaws to keep it all running.
www.thecustomsawyer.com

Thank You Sponsors!