LX50Super- Dimension request

TriumphTriple · March 14, 2024, 10:09:57 AM

Hi all. I have my LX50Super coming in a couple weeks. I am about to set up the base as I mentioned in a previous post. I am at a road block though. I am setting up the base this weekend but I can't find info on the spacing of the leveling feet. I contacted woodmizer but they couldn't give me an answer. It would be awesome if someone with this mill could take this measurement. Center of feet to center of feet. I am not sure if the rails are the same spacing as the LX55, if so then the center of the feet would be 2'4".

I appreciate any help.

hillsman · March 16, 2024, 04:39:49 PM

Just measured mine and centerline to centerline is 27.625" , hope it's not too late

rusticretreater · March 16, 2024, 05:23:25 PM

They couldn't tell you? Jeeze Loueeze.

I just checked the manual and it shows only the entire width and not C/L for the feet. I can't believe no one has wanted to know.

Mr. Buck · March 16, 2024, 10:51:20 PM

Hi all, for what its worth, wood mizer has the technical drawings for many of the mills on their website at https://apps.woodmizer.com/Manuals/ManualsCustomer.aspx

Unfortunately, the LX50 Super isn't.

I had a lot of the same questions about dimensions on my LT35HD. Just go to the link, open your model #, and look for a "specifications" doc. Has all sorts of good info, including drawings with all the dimensions needed.

rusticretreater · March 17, 2024, 11:06:43 AM

Following the link above, you then click on sawmills -> LX50 -> LX50 Super. There are two manuals shown, both labeled 850_e. An early manual and the current manual.

Both manuals show dimensions of the saw on page chap 1.14 (page 1-17) but only overall dimensions of the width. It doesn't show the C/L of the feet.

TriumphTriple · March 19, 2024, 01:21:00 PM

Quote from: hillsman on March 16, 2024, 04:39:49 PMJust measured mine and centerline to centerline is 27.625" , hope it's not too late

I haven't checked on this post in a bit. All is good. We dug the holes but thats it. I decided to move the mill to a different location. I was guessing 2'4" so it wouldn't have been that off anyway. Thank you, it really helps. Now to dig new holes lol.

TriumphTriple · March 19, 2024, 01:23:03 PM

Quote from: rusticretreater on March 16, 2024, 05:23:25 PMThey couldn't tell you? Jeeze Loueeze.

I just checked the manual and it shows only the entire width and not C/L for the feet. I can't believe no one has wanted to know.

Yeah I was pretty surprised. I heard they had great service and was left disappointed. At least this great community helped!

jerryhar · February 14, 2025, 10:59:23 AM

Quote from: TriumphTriple on March 19, 2024, 01:21:00 PM
Quote from: hillsman on March 16, 2024, 04:39:49 PMJust measured mine and centerline to centerline is 27.625" , hope it's not too late

I haven't checked on this post in a bit. All is good. We dug the holes but thats it. I decided to move the mill to a different location. I was guessing 2'4" so it wouldn't have been that off anyway. Thank you, it really helps. Now to dig new holes lol.

How did you end up mounting it? I have a LX50 on the way and exploring options. Do you have a pic of yours assembled and on posts/rails?