iDRY Vacuum Kilns

Sponsors:

Help wiring a jointer

Started by brdmkr, July 06, 2007, 12:45:53 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

brdmkr

July 06, 2007, 12:45:53 AM
I finally put together my jointer today, but I am concerned about my wiring.  The wiring diagram shows black to red, white to white, and green to a little symbol (not to any of the other wires).  The motor requires 220V.  I assume that the green is a ground and the others are hot, but I don't see any special place to attach the green wire.  What am I missing here?

Jointer is a Grizzly if'n that helps any.

Lucas 618  Mahindra 4110, FEL and pallet forks, some cant hooks, and a dose of want-to

LeeB

#1
July 06, 2007, 02:08:03 AM
Green is ground.
'98 LT40HDD/Lombardini, Case 580L, Cat D4C, JD 3032 tractor, JD 5410 tractor, Husky 346, 372 and 562XP's. Stihl MS180 and MS361, 1998 and 2006 3/4 Ton 5.9 Cummins 4x4's, 1989 Dodge D100 w/ 318, and a 1966 Chevy C60 w/ dump bed.

Norm

#2
July 06, 2007, 07:33:50 AM
Lee's got it, if they don't give you a ground point you can run a wire with a crimped on connector to any out of the way place on the frame.

jgoodhart

#3
July 06, 2007, 02:48:49 PM
 If you go to the Grizzly site and choose the G0490 jointer then select the manual it shows the wiring in detail on pages 42 and 43.

http://images.grizzly.com/grizzlycom/manuals/g0490_m.pdf

Maybe the link will work?
Print
Go Up Pages1
User actions

Thank You Sponsors!