iDRY Vacuum Kilns

Sponsors:

getting lazy

Started by lopet, June 20, 2015, 11:13:39 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Windyhill

cool! I like this kind of "lazy"!

Gearbox

If they put a 1 inch x 2inch pre splitter on the wedge that 50 ton would split those elm . A pre splitter welds to the center of the wedge and pushes in first to start the split . I have one on my splitter but it is on the botton . I need to cut it off and move it up to the center .
Gearbox
A bunch of chainsaws a BT6870 processer , TC 5 International track skidder and not near enough time

lopet

Their center knife is about 2-3 inches ahead of everything else.  Those marks on the block of wood are only from  the center knife and not from the entire splitting wedge.   I think it just was a awkward piece of wood.
I watched the guy reaching in, flipping and turning the block, nope. He kicked it out cut a second one, same thing. Then I signaled him to reverse the log and carry on.


 
Make sure you know how to fall properly when you fall and as to not hurt anyone around you.
Also remember, it's not the fall what hurts, its the sudden stop. !!

Thank You Sponsors!