Author Topic: Bug damage in EWP (Read 912 times)

dirtymartini · « **on:** August 25, 2019, 12:11:00 PM »

Is this too damaged by whatever bug got in there before I could saw it? I was going to use it for an 8x8 beam.

Mike W · « **Reply #1 on:** August 25, 2019, 05:37:40 PM »

if that's pretty much the bulk of the damage in your photo, i wouldn't worry about it personally. albeit not knowing what your intention is for use beyond being a beam hard to make that call unequivocally. suppose if you were really concerned, one could always epoxy the damage with a slow cure 2 part epoxy $:-\$

Don P · « **Reply #2 on:** August 25, 2019, 07:19:06 PM »

That drops it below any structural grade.

We've been talking about them in another thread;
http://forestryforum.com/board/index.php?topic=107384.msg1674896#msg1674896

SawyerTed · « **Reply #3 on:** August 25, 2019, 07:57:39 PM »

For decorative purposes it might be ok. Looks like some other deterioration/softness in the upper right area of your photo? Usually insect damage like that goes along with other issues.

I'd be concerned about a heavy load or long span.

Southside · « **Reply #4 on:** August 25, 2019, 08:30:02 PM »

The other concern is what else is growing up in the wood? Maybe it would eat more, or maybe it would decide to come out and have a family reunion / feast on the rest of your new building. Kinda look like they may be bee holes.

thecfarm · « **Reply #5 on:** August 25, 2019, 09:42:00 PM »

I doubt bee holes. The link that Don P posted is my bet.
Now if I needed a 2x6 and that was a 2X10 I might use it. But I would not use it for a 2x6. Eastern white pine is not strong too begin with. But I plan on using some for building. Most of my hemlock is gone. It will be thick stuff.

dirtymartini · « **Reply #6 on:** August 31, 2019, 05:52:49 PM »

Thanks for all the replies, I wasn't getting notifications. I meant to take a pic of the worm today...fat white and about 1"long. Looks like some kind of larvae.

69bronco · « **Reply #7 on:** September 01, 2019, 01:05:19 PM »

Pine borer, once you remove the bark and saw they're done for. I wouldn't use the one pictured for anything structural.

moodnacreek · « **Reply #8 on:** September 01, 2019, 11:08:31 PM »

Fresh cut logs normally will not have these worm holes. When the pine lay around in spring or summer this [and blue stain] is what happens.

SPACE AVAILABLE

Forestry Forum
Sponsored by: