Text only | Text with Images

The Forestry Forum

General Forestry => Chainsaws => Topic started by: Vladislav500 on April 26, 2018, 02:44:35 AM

Title: Who knows the model of this saw?
Post by: Vladislav500 on April 26, 2018, 02:44:35 AM
Hi guys!!
Purchased this old Partner saw parted.Want to rebuild and need to buy some parts for it but has no idea about the model of this saw. There's no label there. Who knows the model of this saw pls help!!
(https://forestryforum.com/gallery/albums/userpics/49799/P4250074.JPG?easyrotate_cache=1524724646)
Title: Re: Who knows the model of this saw?
Post by: sablatnic on April 26, 2018, 07:42:36 AM
It is a Partner P48 or P49. It was made by Jobu for Partner for a few years around 1977.
Parts? I don't know - Jobu closed about 40 years ago.
Title: Re: Who knows the model of this saw?
Post by: Vladislav500 on April 26, 2018, 02:15:30 PM
Oh, thank You very much!!  I really appreciate Your help!!
It seems to me that its P48!! Decal is the same.
You're right) Its time to sell parts not buy))) Rare saw.

Title: Re: Who knows the model of this saw?
Post by: sablatnic on April 27, 2018, 08:43:18 AM
If I am not wrong again, the P48 has ignition points and the P49 has RIFA electronic ignition.
I haven't seen any for almost 35 years, so it is pretty rare.
Title: Re: Who knows the model of this saw?
Post by: Vladislav500 on April 27, 2018, 11:22:46 AM
 
(https://forestryforum.com/gallery/albums/userpics/49799/P4270077~0.JPG?easyrotate_cache=1524841960)
 
(https://forestryforum.com/gallery/albums/userpics/49799/P4270075~0.JPG?easyrotate_cache=1524841960)
 

It has BOSCH module, no breaker point. The ignition coil needs to be cleaned, then I can tell who is the manufacturer. I'm sure there could be a variety of suppliers at that time. Flywhell has a mark Made In Germany, but I couldn't find out who is the manufacturer. The piston and cylinder are Mahle made.
Title: Re: Who knows the model of this saw?
Post by: sablatnic on April 27, 2018, 12:49:21 PM
It's a 49'er.  ^_^
Have just been on youtube to look, and this seems to be the only video of a running P49: 
Partner P49 H - YouTube (https://www.youtube.com/watch?v=BxI5zinqoZg)
Title: Re: Who knows the model of this saw?
Post by: Vladislav500 on April 30, 2018, 10:10:16 AM
Yes. You're quite right!! It's P49. P48 comes with breaker point ignition.
Text only | Text with Images