iDRY Vacuum Kilns

Sponsors:

adding a contact strip, solenoid,and fuse

Started by 47sawdust, October 31, 2015, 04:02:25 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

47sawdust

October 31, 2015, 04:02:25 PM
I'd like to add a contact strip ,solenoid,and fuse to my to my 1997 LT30 manual mill.I've added an external alternator and would like to add some hydraulic functions.Has anyone done this?What's the degree of difficulty?
Thanks,
Mick
Mick
1997 WM Lt30 1999 WM twin blade edger Kubota L3750 Tajfun winchGood Health Work is my hobby.

Kbeitz

#1
October 31, 2015, 04:05:34 PM
I'm doing the same thing.
I'm useing forklift battery plugs for my contact.
Collector and builder of many things.
Love machine shop work
and Wood work shop work
And now a saw mill work

DGK

#2
October 31, 2015, 05:43:41 PM
I just added a second contact strip, second hydraulic pump, solenoid, fuse, & external battery to my LT40. My mill started out as a LT40 manual with hydraulic log loader. Now, it is a double pumped fully hydraulic mill. Level of difficulty depends on your experience. I used all factory parts that bolted on easily. The frame modification for the two-plane clamp was done by a fabrication shop as welding is outside of my skill set.
Doug
Yukon, Canada

LT40G38 modified to dual pumped hydraulic plus, HR120 Resaw, EG200 Edger, Bobcat S185,Bobcat S590, Logosol PH260M3, Sthil MS660's, MS460,MS362's MS260, Trailtech dump trailer, F350, F700 Tilt-Deck log/Lumber Hauler, JD440B Skidder, Naarva S23C Processor
Print
Go Up Pages1
User actions

Thank You Sponsors!