iDRY Vacuum Kilns

Sponsors:

Pulling Logs With A Farm Tractor & UniForest Winch From Hud-Son

Started by weimedog, November 21, 2021, 06:46:56 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

weimedog

Husqvarna 365sp/372xpw Blend, Jonsered 2171 51.4mm XPW build,562xp HTSS, 560 HTSS, 272XP, 61/272XP, 555, 257, 242, 238, Homelite S-XL 925, XP-1020A, Super XL (Dad's saw); Jonsered 2094, Three 920's, CS-2172, Solo 603; 3 Huztl MS660's (2 54mm and 1 56mm)

thecfarm

Looks like you have a remote for that winch!! Nice!!
I have very few places with all hardwood. I have a mixture of soft and hard. That land maybe steep, but it's a level steep.  ;D  I have a steep place like that. But it goes the correct way.  ???  I go in empty and than a load pushes me down the hill.  ;)
I cut off a spot that I could not get too. It was a bog. Biggest stick was a foot across. That was some slow work pulling cable out. Than I had to have an extension too, hook and unhook was even slower. But with trees being small, I could winch out more than one at a time. Many trees was 4- 6 inches across too. I would lay a chain on the ground and pile wood on the chain. Sometimes I would have a bundle of wood more than 2 feet across.
Nice size tractor. I do all my work with a 40hp.
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Thank You Sponsors!