Print Page - rim sprokets

Title: rim sprokets
Post by: glenn440 on February 02, 2019, 12:37:34 PM

Recently bought a 42" bar and chain combo from Baileys - part PMC42SS63 for my MS660.
Did not realize it at the time but find out today that the gauge is .063 when all my previous stuff was .050
This is a matched bar and chain but does it require a different sprocket from the normal Stihl 006421223?
Would think that as long as it is the same pitch the sprocket should not be different?

Title: Re: rim sprokets
Post by: sawguy21 on February 02, 2019, 01:02:21 PM

That is correct, chain gauge does not affect the sprocket.

Title: Re: rim sprokets
Post by: John Mc on February 02, 2019, 04:23:49 PM

BTW, welcome to the Forestry Forum, @glenn440 (http://forestryforum.com/board/index.php?action=profile;u=43698)

Title: Re: rim sprokets
Post by: glenn440 on February 02, 2019, 05:40:48 PM

Thanks Guys!

The Forestry Forum

General Forestry => Chainsaws => Topic started by: glenn440 on February 02, 2019, 12:37:34 PM