iDRY Vacuum Kilns

Sponsors:

How does Battery connect to Engine WoodMizer

Started by Sixacresand, February 23, 2021, 09:45:48 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Sixacresand

February 23, 2021, 09:45:48 PM
I have used a LT40 hydraulic for 7 years and just realized today that I don't know how the power is transferred between the battery and the starter/alternator.  The head moves up and down and there is no visible power strip, like the one for the hydraulic motor.  I have not ventured inside the machine except to tighten the main belts.  
"Sometimes you can make more hay with less equipment if you just use your head."  Tom, Forestry Forum.  Tenth year with a LT40 Woodmizer,

Magicman

#1
February 23, 2021, 10:37:56 PM
John, You Sir are a bad man !!

Actually I have never even thought about it but on mine there is only one way.  It has to go up the square tube to the Control Box and then into the flexible corrugated tube to the engine.
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman
Print
Go Up Pages1
User actions

Thank You Sponsors!