iDRY Vacuum Kilns

Sponsors:

Nice log

Started by Bruno of NH, August 31, 2014, 04:19:16 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bruno of NH

Loaded and cut a nice pine log .
15 ft long 27 inch in diameter .
Changed from a 10 degree band to a 7 dergree band with 22 side set it cuts alot better than the 10 degree bands i have been using.
It seems to make a smoother cut and works the mill less .
Thew log is almost clear making some nice clear wide boards .

  

  

  

  

 
Thanks Jim Bruno of NH
Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

WIwoodworker

Nice looking log! What did you end up sawing out of it?
Peterson 9" WPF

Bruno of NH

All 1 inch boards have not added up the bdft yet .
Im thinking of drying it and making flooring for my house .
Jim
Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

Ga Mtn Man

Nice log with not much taper and a good opening cut.

Is that you in the second pic doing the "Happy Sawdust Dance"? :D
"If the women don't find you handsome they should at least find you handy." - Red Green


2012 LT40HDG29 with "Superized" hydraulics,  2 LogRite cant hooks, home-built log arch.

Bruno of NH

Ga Mtn Man
That's not me dancing that's my helper Brenden .
He's  a hard worker but I don't know what's he's doing there !
Kind of funny !!
Jim Bruno of Nh
Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

Magicman

Looking good.   8)
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

cutterboy

To underestimate old men and old machines is the folly of youth. Frank C.

copperhead10

good looking flooring

WDH

Maybe ants in his pants. 
Woodmizer LT40HDD35, John Deere 2155, Kubota M5-111, Kubota L2501, Nyle L53 Dehumidification Kiln, and a passion for all things with leafs, twigs, and bark.  hamsleyhardwood.com

Sixacresand

Nice log.  I like the 7 degree blades too.  Like your safety sign, also.   
"Sometimes you can make more hay with less equipment if you just use your head."  Tom, Forestry Forum.  Tenth year with a LT40 Woodmizer,

Peter Drouin

Quote from: Bruno of NH on August 31, 2014, 04:37:31 PM
All 1 inch boards have not added up the bdft yet .
Im thinking of drying it and making flooring for my house .
Jim






I thought you were cutting wood for your mill shed :)
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Bruno of NH

Peter
Lumbers all cut for mill shed waiting for cooler temps to start build .
Got this pine and wanted to cut it before blue stain and ants got at it .
Jim Bruno of NH
Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

Thank You Sponsors!