iDRY Vacuum Kilns

Sponsors:

Large White Oak

Started by sawwood, October 04, 2013, 09:36:18 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

JustinW_NZ

Quote from: mesquite buckeye on October 08, 2013, 07:50:27 PM
That log looks eucalyptoidy. ;D I remember doing that. ;D 8) 8) 8) :snowball:

Good job on the cutline BTW. 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) ;D

yippers good guess  ;D
eucalyptus globulus, so cut wet like that around 1100kg per cubic meter.

Im getting better at freehand cutting with the saw, that was one of my better cuts so far  8)

Thanks for the tips Loggah, all makes sense.
I also just got a band thing to go around the 660's filter as fine dust seem to really work its way into the filter and lean the air out, the little sock thing makes cleaning that out WAY simpler...

Cheers
Justin
Gear I run;
Woodmizer LT40 Super, Treefarmer C4D, 10ton wheel loader.

customsawyer

The more you do it the easier it will get. ;)
Two LT70s, Nyle L200 kiln, 4 head Pinheiro planer, 30" double surface Cantek planer, Lucas dedicated slabber, Slabmizer, and enough rolling stock and chainsaws to keep it all running.
www.thecustomsawyer.com

Thank You Sponsors!