Text only | Text with Images

The Forestry Forum

General Forestry => Sawmills and Milling => Topic started by: Bruce N on July 28, 2017, 06:26:43 PM

Title: Need Help on Log Master [ LM5 ]
Post by: Bruce N on July 28, 2017, 06:26:43 PM
 Hi all, Looking for some guidance so I can maintain my mill.     A log master ( LM-5 ).  Dose any know how to find a owners  manual & a electric schematic. I call log master they said they didn't   have or print any info any more. Tried looking on internet can't seem to fined any thing about them .
Thanks for the help.   Bruce N
Title: Re: Need Help on Log Master [ LM5 ]
Post by: Kbeitz on July 28, 2017, 08:04:17 PM
https://forestryforum.com/board/index.php?topic=72096.0
Title: Re: Need Help on Log Master [ LM5 ]
Post by: Grizzly on July 29, 2017, 11:39:16 AM
I have an LM2 and some others on here have the LM4. I have the complete manual for mine but not sure it's much use to you. Yours is a much bigger mill. But if you think I can help just send me a pm and we can share contact info.

Lyle
Title: Re: Need Help on Log Master [ LM5 ]
Post by: Solomon on August 01, 2017, 08:06:02 PM
I have an LM4,  I think your machine is the same basic machine as mine with a two inch blade verses my inch and a half.  Yours is likely a little more robust , thicker band wheels, and a 6 cyl  cummings  verses my  4 cyl 
Perkins / Catapiller.
You may have the extra set of front and rear dogs/Clamps.
If I can answer any questions just ask.   :P
Text only | Text with Images