iDRY Vacuum Kilns

Sponsors:

Rear hydraulics for a farmpro?

Started by Compensation, May 08, 2019, 04:17:26 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Compensation

So I went to the dark side and got a farmpro 2425 to help with loading sawdust and other minor things. It has a FEL and I want to use a backhoe and possibly a stump grinder on the rear. Trying to figure out how to go about it since it doesnt have the hyd hookups in the rear. Thought about using a couple of T's up front or running from the FEL. Then I seen some have a plate to bolt up a pump above the pto. Figured I would ask before I start spending money on it.
D4D caterpillar, lt10 Woodmizer, 8x12 solar kiln, enough Stihl's to make my garages smell like their factory :) Ohh and built Ford tough baby!

snowstorm

you can use a diverter valve to run the hoe off the pump for the fel. 

Compensation

Like the power beyond port and t into the return?
D4D caterpillar, lt10 Woodmizer, 8x12 solar kiln, enough Stihl's to make my garages smell like their factory :) Ohh and built Ford tough baby!

snowstorm

if it has a power beyond valve section you can use that

Thank You Sponsors!