iDRY Vacuum Kilns

Sponsors:

What is the correct sparkplug for a Stihl...

Started by Red 93 L1 #3383, June 25, 2009, 01:41:27 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Red 93 L1 #3383

020T & the 064AV?  I acquired these saws used & was wondering what the correct plug was for each.  Also do you prefer NGK's, Champion,...  Being an auto mechanic I don't like Champions or Bosch, they seem to give the most troubles.
Stihl's: 2-064AV's, 020T, MS 310
'93 Ford F-150 Lightning, '94 F-150 4x4, '92 F-150 4x4 '80 F-150 EFI 7.5L, '04 Expedition (Wife's)

Rocky_J

Bosch WSR6F is what I have in the shop for the Stihls.

John Bartley

Quote from: Rocky_J on June 25, 2009, 06:57:52 AM
Bosch WSR6F is what I have in the shop for the Stihls.

Yup, that's what I always stocked for them also. Lots of people put in the Champion CJ7Y, but I find that just a shade too warm for steady running.

cheers

John
Kioti DK35HSE w/loader & forks
Champion 25hp band mill, 20' bed
Stihl MS361
Stihl 026

flapjack23

My local dealer stocks NGK BPMR7A for all his Stihls. I was wondering what brand guys prefer also.
Stihl MS361

sablatnic

Vi are selling NGK BPM7A. It is the same as BPMR7A, but without the resistor.

Ed

Quote from: Rocky_J on June 25, 2009, 06:57:52 AM
Bosch WSR6F is what I have in the shop for the Stihls.

+1

Bosch for the Huskies too.

Ed

ScottAR

cj6yc is the champion# for all the stihl engines I can think of
I like the NGK plugs best on small engines.
Scott
"There is much that I need to do, even more that I want to do, and even less that I can do."
[Magicman]

timber tramp

  I've had pretty good luck with NGK plugs. (BPMR7A) Don't know about the others.  :) TT
Cause every good story needs a villan!

Cope


Stephen1

Quote from: John Bartley on June 25, 2009, 07:43:28 AM
Quote from: Rocky_J on June 25, 2009, 06:57:52 AM
Bosch WSR6F is what I have in the shop for the Stihls.

Yup, that's what I always stocked for them also. Lots of people put in the Champion CJ7Y, but I find that just a shade too warm for steady running.

cheers

John

I am going to try the Bosch, I have used the the ngk and find they die in the 361, I change to a new plug and it fires right up.
IDRY Vacum Kiln, LT40HDWide, BMS250 sharpener/setter 742b Bobcat, TCM forklift, Sthil 026,038, 461. 1952 TEA Fergusan Tractor

Thank You Sponsors!