iDRY Vacuum Kilns

Sponsors:

New Helper

Started by goose63, January 11, 2019, 07:36:45 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

goose63

I have a new helper at the mill



 



 

And I will be warm when blowing snow

The bucket comes off with the flip of two levers so I can put on forks
goose
if you find your self in a deep hole stop digging
saw logs all day what do you get lots of lumber and a day older
thank you to all the vets

thecfarm

How many hp is that?
That will blow some snow. I have one on the back of the wife's tactor,30hp. But no cab. You will like that too.
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Magicman

I am glad that I have friends that have neat stuff.  I say congratulations. I know that it is work, but at least you can enjoy your work.  ;D
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

goose63

Yes Sir Lynn I enjoy my work

the cfarm its 37 hp heater ac radio can holder and I don't drink beer any more the coffee cup will fit tho 8) 8)
goose
if you find your self in a deep hole stop digging
saw logs all day what do you get lots of lumber and a day older
thank you to all the vets

Kwill

Nice looking tractor and very handy. I see you are in North dakota. I've worked up there since spring 2009 just north of you .
Built my own hydraulic splitter
Built my own outdoor wood stove
Built my own log arch
built my own bandsaw sawmill
Built my own atv log arch.
Built my own FEL grapple

terrifictimbersllc

Bruno should look outside and see if his tractor is still there😀😀😀
DJ Hoover, Terrific Timbers LLC,  Mystic CT Woodmizer Million Board Foot Club member. 2019 LT70 Super Wide 55 Yanmar,  LogRite fetching arch, WM BMS250 sharpener/BMT250 setter.  2001 F350 7.3L PSD 6 spd manual ZF 4x4 Crew Cab Long Bed

SawyerTed

That's a great looking machine!  
Woodmizer LT50, WM BMS 250, WM BMT 250, Kubota MX5100, IH McCormick Farmall 140, Husqvarna 372XP, Husqvarna 455 Rancher

Sixacresand

"Sometimes you can make more hay with less equipment if you just use your head."  Tom, Forestry Forum.  Tenth year with a LT40 Woodmizer,

goose63

Where at Kwill. If you get the chance give a shout
goose
if you find your self in a deep hole stop digging
saw logs all day what do you get lots of lumber and a day older
thank you to all the vets

btulloh

Very nice machine, Goose.  I sure would like to have a cab like that.  
HM126

petefrom bearswamp

Very nice
I hear pretty good things about Mahindra
Kubota 8540 tractor, FEL bucket and forks, Farmi winch
Kubota 900 RTV
Polaris 570 Sportsman ATV
3 Huskies 1 gas Echo 1 cordless Echo vintage Homelite super xl12
57 acres of woodland

Kwill

Quote from: goose63 on January 11, 2019, 08:52:18 AM
Where at Kwill. If you get the chance give a shout
Up around the grand forks area. Not sure if I will go back this spring or not.
Built my own hydraulic splitter
Built my own outdoor wood stove
Built my own log arch
built my own bandsaw sawmill
Built my own atv log arch.
Built my own FEL grapple

Bruno of NH

Mine still there 
It's got ice chains on the front axle. 
Moved 1ft of heavy wet snow on Wednesday 
I'm a Mahindra fan👍
Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

YellowHammer

Nice.  I got chills just looking at the big flat snow covered expanse in the background  
YellowHammerisms:

Take steps to save steps.

If it won't roll, its not a log; it's still a tree.  Sawmills cut logs, not trees.

Kiln drying wood: When the cookies are burned, they're burned, and you can't fix them.

Sawing is fun for the first couple million boards.

Be smarter than the sawdust

Deere80

Nice machine Goose, Nate B from MN brought a load of hard wood to me and asked how you been doing. So you must of bought logs from him before, he is a good guy to deal with.
Wood-Mizer LT40WIDE 38HP

goose63

Quote from: Deere80 on January 11, 2019, 12:57:56 PM
Nice machine Goose, Nate B from MN brought a load of hard wood to me and asked how you been doing. So you must of bought logs from him before, he is a good guy to deal with.
Nope never bought logs from him he is the reason I now have a flat bed so I can go get the logs when Ineed them.
He told me if I keep bugging him he would not bring my logs in 3 months I asked him 3 times
goose
if you find your self in a deep hole stop digging
saw logs all day what do you get lots of lumber and a day older
thank you to all the vets

samandothers

I like it !  Get a grapple and 3rd function valve for your loader!

Chuck White

That will stack a pretty fair sized log!
~Chuck~  Cooks Cat Claw sharpener and single tooth setter.  2018 Chevy Silverado and 2021 Subaru Ascent.
With basic mechanical skills and the ability to read you can maintain a Woodmizer  LT40!

goose63

Yes Sir Chuck 2000 lbs

Now the dealer I bought it from wants a big bar top told Doug abought a guy in Rutland not far from here he said nope you bought the tracter from me I'm buying the wood from you  :snowball:  :snowball:  
goose
if you find your self in a deep hole stop digging
saw logs all day what do you get lots of lumber and a day older
thank you to all the vets

Andries

Goose - congrats on the new 'helper'!
What's her name?
LT40G25
Ford 545D loader
Stihl chainsaws

Crossroads

Nice! Congratulations 
With the right fulcrum and enough leverage, you can move the world!

2017 LT40 wide, BMS250 and BMT250,036 stihl, 2001 Dodge 3500 5.9 Cummins, l8000 Ford dump truck, hr16 Terex excavator, Valley je 2x24 edger, Gehl ctl65 skid steer, JD350c dozer

frazman

Yup, that cab sure will come in handy during the winter months. I like working with the quick attach system. Very nice tractor and should work well.

Thank You Sponsors!