iDRY Vacuum Kilns

Sponsors:

What I've been Doing, am Doing, and will be Doing

Started by Corley5, July 26, 2008, 12:35:26 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Mooseherder


Jeff

Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

dewwood

Looks like you still have a lot of things going on! 8) 

Hope things go well getting your sawing done for the addition.
Selling hardwood lumber, doing some sawing and drying, growing the next generation of trees and enjoying the kids and grandkids.

Corley5

 


Going Up  8)








And Up  8)










A look around the 1st floor  :)










The 2nd story

















A look around the outside  ;D

The exterior is done except for deck railings and wiring the outside lights and plugs.  The exterior wall under the porch will get a planed white cedar treatment.  Eventually the porch will be enclosed.  I got the lights wired up on the 1st floor and they even work  ;D  I've got some of the drilling done to pull the wire for the plugs.  The insulation is on site for both floors as are the studs for the interior partitions.  Got a whole lot to do yet but it's all dried in.  The siding install was finished over Thanksgiving while we were away and I've been plugging along myself since when I've got the time and energy.  I suppose my next step is some heat.  The lines from the boiler are in the basement.  It's just a matter of a pump and a heat exchanger to get some temporary heat going.  The final system will be in floor.  Heat would give my more incentive to work on it but by the time get it hooked up spring will probably be here  ;) ;D
Burnt Gunpowder is the Smell Of Freedom

Lud

That's really come together nice.  Like the blue too!
Simplicity mill, Ford 1957 Golden Jubilee 841 Powermaster, 40x60 bankbarn, left-handed

paul case

thats sure a neat build and other stuff too. i like your equipment or what we have seen of it. it reminds me of mine.
i sure would like to see that h on the edger. i was thinking of running my edger with a m i have. pc
life is too short to be too serious. (some idiot)
2013 LT40SHE25 and Riehl edger,  WM 94 LT40 hd E15. Cut my sawing ''teeth'' on an EZ Boardwalk
sawing oak.hickory,ERC,walnut and almost anything else that shows up.
Don't get phylosophical with me. you will loose me for sure.
pc

Burlkraft

Why not just 1 pain free day?

Peter Drouin

A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

dewwood

Selling hardwood lumber, doing some sawing and drying, growing the next generation of trees and enjoying the kids and grandkids.

Thank You Sponsors!